Best Answer

More data is required. I assume the drum has the form of a cylinder; the volume of a cylinder is calculated as pi x radius squared times height. Different combinations of radios and height can give the same volume.

Q: What is the Diameter of an 80 gallon drum?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

The drum should measure 23 inches diameter 36 inches height These are all external measurements.

Thereare different shapes of drum, but most 25 gallon drums are about 30 inches high

May depend on the drum, but on average 44 pounds

Approximately 458 pounds.

A 55 gallon drum is just a cylinder and, as such, the volume can be determined by the formula ¶r2h (Pi times radius squared times height). According to Wikipedia, standard 55 gallon drums are 22.5 inches in diameter and 33.5 inches high. http://en.wikipedia.org/wiki/55_gallon_drum The equation is thus 3.14 * 11.25^2 * 33.5. That comes out to 13313 cubic inches or 7.7 cubic feet.

Related questions

Its diameter is twice its radius

The dimensions for a 20 gallon drum is 21.75 inches high, 18.25 inches inside diameter, and 18.75 inches outside diameter. It can accommodate a load of 199 pounds.

V=(πD2/4)h where D is the diameter of the 55 gallon drum and h is the height of the oil. Or if you prefer V=(2πr2h where r is the radius of the drum and h is as above.

The drum should measure 23 inches diameter 36 inches height These are all external measurements.

You pour four gallons into the five gallon drum, and take the ten gallon drum with the other four gallons of oil in that.

Assuming a dime has a diameter of around 17.91mm and a thickness of around 1.35mm, you could fit approximately 1,258,000 dimes in a 55-gallon drum. This calculation accounts for the available volume in the drum and the space occupied by a single dime.

The dimensions of a 210 liter steel drum is 890 mm high by 580 mm diameter. The weight empty is typically 16 kg.

Fill the 5-gallon drum. Pour the contents into the 3-gallon drum, filling it. Now you have 2 gallons left in the big one.Empty the 3-gallon drum. Pour the 2 gallons into it. At this point there is room for one more gallon.Now refill the 5-gallon drum and pour off as much as it takes to fill up the small one. That means you are removing one gallon.Now you have exactly 4 gallons in the 5-gallon drum.or Fill the 3 gallon drum. Pour the contents into the 5 gallon drum. Refill the the 3 gallon drum and pour the contents into the 5 gallon drum until it is full. Empty the 5 gallon drum. You have 1 gallon left in the 3 gallon drum. Pour the remaining 1 gallon into the 5 gallon drum. Re-fill the 3-gallon drum and pour that into the 5 gallon drum giving you 4 gallons. or Tip the 5 gallon drum and fill it until water is level to both the bottom and spilling out the top; next do the same with the 3 gallon drum; then pour the half full 3 gallon drum into the half full 5 gallon drum, rusulting in 2.5 plus 1.5 equals 4 gallons! orWatch Die Hard 3 for the answer.

A five-gallon drum can hold up to about 18.927 liters.

A 150-gallon drum contains 0.0036 gallon per cubic inch.

A metal fifty-five gallon lube oil drum is thirty five inches tall. Given: Area of a circle = 1/4piDiameter2 and: 231in3 / gallon Take the square root of: 55 gal x 231in3 / gallon x 4 / 35in / pi I come up with about 21.5 inches for the diameter, which sounds about right. But of course individual drums vary a bit, so grab a tape measure if you have a drum handy.

There are approximately 0.67 cubic feet in a 5 gallon bucket and 7.35 cubic feet in a 55 gallon drum.