It depends to the acceptable risk level in your company. Usually AFR=10 is acceptable in most companies.
I Din't Know
Number of accidents divided by time.
The minimum acceptable sampling rate is determined by the Nyquist theorem, which states that to accurately capture a signal without aliasing, the sampling rate must be at least twice the highest frequency present in the signal. This rate is known as the Nyquist rate. For example, if a signal contains frequencies up to 20 kHz, the minimum sampling rate should be 40 kHz. In practice, higher rates are often used to ensure better fidelity and to accommodate filter roll-off.
Its frequency.
baud rate is the rate of symbol changes...symbol can be of 1 bit, 2 bit , 3 bit etc.... Where as frequency is the inverse of rate of lowest unit in a digital transimission...
30
A lower accident frequency rate is better as "frequency" means "how often something occurs".
accident frequency rate = accidents with lost time x 1.000.000 / manhours worked
I Din't Know
Number of accidents divided by time.
An accident frequency rate is the number of accidents that occur within a specific company during a defined time period. This rate is often used to find areas within the company that require improvement in safety standards.
fatal accident rate is number of fatal accidents x 100,000 divided by the total hours worked. Accident incident rate is the total number of accidents x 100,000 divided by the total hours worked. accident severity rate is the total days lost x 1,000 divided by the total hours worked
According to Gazette's six year road accident analytics, Montereal roads don't have a particularly high car accident, but can be considered below average.
The rate of vibration is called the frequency.
500 manpower X 40 hours a week X 50 weeks per year = 1000000
the amplitude increases
$0.50 is acceptable for tax purposes federally so should be acceptable in NS.