for where pi = 3.14159265500:
500 * pi = 1,570.79633
The radius of a circle is half of its diameter. Therefore, for a circle with a diameter of 500, the radius would be 500 divided by 2, which equals 250.
The external surface area of a pipe is a rectangle with dimensions of the circumference of the pipe multiplied by the length. 48*pi*500 24000*pi square feet about 7550208 square feet
110
500 mcm (micrometers) is equivalent to 0.5 millimeters. To convert micrometers to millimeters, you divide the number of micrometers by 1,000, as there are 1,000 micrometers in a millimeter. Thus, the diameter of 500 mcm is 0.5 mm.
Mesh 500 typically refers to a mesh screen with 500 openings per linear inch. The size of each opening or wire diameter can vary depending on the specific construction of the mesh, but it generally corresponds to an approximate opening size of about 25 microns. This means that particles larger than 25 microns will be trapped by the mesh, while smaller particles can pass through.
What is the approximate circumference of a circle with a diameter of 500 kilometers? Use π ≈ 3.14.
The diameter is about 159.2
Easy. Just divide the circumference by Pi (3.1416) to calculate the diameter.In your example, it would look like this: 500 / Pi (3.1416) = 159.15 foot diameter (rounded).
About 4.5 acres for a 500-foot diameter circle.
To calculate the area of a circle with a diameter of 1000 feet, you first need to find the radius by dividing the diameter by 2, which gives you a radius of 500 feet. The formula for the area of a circle is πr^2, where π is approximately 3.14159. So, the area of a circle with a radius of 500 feet is approximately 3.14159 x (500)^2 = 3.14159 x 250000 = 785,397.5 square feet. To convert square feet to acres, you divide by 43,560 (the number of square feet in an acre), which gives you approximately 18.02 acres in a circle with a 1000-foot diameter.
To figure out how far in ONE revolution, we need to know the circumference. Circumference is equal to pi times diameter. Diameter is 2 times the radius. 3.5 x 2= 7. 7 x pi (3.14) is 21.98 ft, so one revolution is 21.98. Multiply that by 500 for your final answer. Good luck!
4.50756522 acres, so 4 whole acres with a remainder of 22,109 ft.
The dimensions of a cricket field vary by location. There is no standard field size for cricket. It is a circle that has a diameter of 450 to 500 yards.
Someone told me it was 6 moles across but how big are these moles?
The external surface area of a pipe is a rectangle with dimensions of the circumference of the pipe multiplied by the length. 48*pi*500 24000*pi square feet about 7550208 square feet
The 500 A-Square is 51 caliber, or .510". The diameter of the lands of the rifling is .500" and the diameter of the grooves of the rifling is .510". J. Villalovos
The average diameter of the mouth of a 500 ml glass beaker is around 8-9 cm.