1.5!
It all depends on the size of the toilet The size of the cistern. the SASE of the cistern outlet, the material that the toilet is made from, the size of the sewerage pipe and what hemisphere you are in.
It varies a lot between brands.
It can take a rough average of between 6 and 18 liters (litres) of water to flush a household toilet. This is dependant on many factors though.Usually, most toilets average around 6 litres, but they vary. The numbers of gallons and litres are usually behind the cover to the toilet.
6 X 4 = 24 toilet rolls in 6 packs.
toilet paper holder
A water cistern is the part of a toilet that holds water which is then used to flush the toilet.
If you do not have a dual flush toilet, put a brick in the cistern
Answerhow does a toilet cistern lid on a vernon tutbury toilet pedestal get released
The cistern.
A vacuum breaker is a device that prevents water in a toilet cistern or water tank, from syphoning back into the toilet cistern or water tank.
cistern
The component that holds toilet water starting with "Ci" is called the cistern. It is a tank located at the back of the toilet bowl that collects and stores water for flushing.
It all depends on the size of the toilet The size of the cistern. the SASE of the cistern outlet, the material that the toilet is made from, the size of the sewerage pipe and what hemisphere you are in.
litres
what is the difference between toilet soap and bathing soap?
A toilet tank, located at the back of the toilet bowl, holds clean water for flushing the toilet.
When you pull the handle a washer is lifted and the water goes down into the toilet and at the same time the cistern fills up once the washer is back in place from the flushing mechanism