It depends on the width of your tub. The distance would be so that your shower curtain would hang in the middle of the edge of the tub.
Half the distance from the wall to the centre of the luminaire, as the distance there is between luminaires. e.g if the distance between luminaires horizontally is 3m then the distance to the centre of the luminaire from the wall is 1.5m. If the distance between the luminaires vertically is 5m then the distance to the centre of the luminaire from the wall is 2.5m
The distance around the wall is 42 linear feet.
6.7
I Use A Ruler For Measuring The Distance Between Blocks In A Wall Or Floor
This shower rod from Home Depot is adjustable to 42" to 72" http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&productId=100032192&langId=-1&catalogId=10053&ci_sku=100032192&ci_src=14110944&cm_mmc=shopping-_-googlebase-_-D29X-_-100032192
The shower rod attaches with screws and tension as according to the directions.
To properly hang a shower curtain rod, first measure and mark the desired height on the wall. Use a level to ensure the rod will be straight. Install wall anchors or screws at the marked points, then attach the rod brackets securely. Finally, place the rod into the brackets and hang the shower curtain.
The Bobrick shower curtain cannot be installed in the ceiling. It is made be installed in the shower wall brackets.
The shower curtain rod should be hung securely on the wall above the bathtub or shower area to hold the shower curtain in place. Make sure it is at a height that allows the curtain to hang properly and prevent water from splashing out.
There are two rods on the Double Crescent Shower Curtain Rod. The outer rod is for a shower curtain and the inner rod is for a shower liner, usually made of plastic.
Getting a cresent shaped shower rod is best.
To install a tub shower curtain rod securely and effectively, follow these steps: Measure the length of the tub to determine the appropriate size of the curtain rod. Use a stud finder to locate the studs in the wall where you want to install the rod. Mark the positions of the studs and use a pencil to mark where the brackets will be placed. Drill pilot holes into the studs at the marked positions. Attach the brackets to the wall using screws, making sure they are securely fastened to the studs. Place the curtain rod into the brackets and adjust it to the desired height. Secure the rod in place by tightening the screws on the brackets. Hang the shower curtain on the rod and enjoy your securely installed tub shower curtain rod.
The purpose of the curved shower rod is to increase the amount of space inside the shower.
To install a stall shower curtain rod securely and effectively, follow these steps: Measure and mark the desired height for the rod. Use a stud finder to locate and mark the studs in the wall. Drill pilot holes into the studs at the marked height. Insert wall anchors into the pilot holes if studs are not available. Attach the mounting brackets to the wall using screws. Place the curtain rod into the brackets and secure it in place. Test the stability of the rod before hanging the curtain.
To hang a shower curtain with support from the ceiling, you will need a ceiling support rod or track with corresponding hardware for installation. Measure the distance from the ceiling to the floor to determine the appropriate length for the rod. Install the rod securely into the ceiling joists or use appropriate anchors to ensure stability before hanging the shower curtain.
The ideal distance for a closet rod depth from the wall is typically around 12-14 inches to ensure proper hanging space for clothing items.
The ideal distance from the wall for a closet rod is typically around 12-14 inches. This allows enough space for hangers to hang freely and clothes to be easily accessible.