None. "square meter" is a unit of volume and "ton" is a unit of mass.
Divide by 9.81
To convert cubic meters (m³) to tons, you need to know the density of the material you are converting, as tons measure weight while cubic meters measure volume. The formula is: tons = cubic meters × density (in tons per cubic meter). For example, if the density of the material is 2 tons/m³, then 1 m³ would equal 2 tons. Always ensure to use the correct density corresponding to the specific material for accurate conversion.
A tonne is a unit of mass; a square meter is a unit of area. You only "convert" units of the same kind.
The weight of 1 square meter depends on the material and its thickness or density. For example, if you're referring to a square meter of concrete, it could weigh about 2.4 metric tons per cubic meter, depending on the specific mix. To convert square meters to metric tons, you need to know the material's density and the thickness of the layer being measured. Without that information, it’s not possible to provide a specific answer.
To calculate the weight of asphalt in a square meter that is 50 mm thick, first convert the thickness to meters (0.05 m). The density of asphalt typically ranges from 2,200 to 2,500 kg/m³. Using an average density of 2,400 kg/m³, the weight of asphalt would be approximately 120 kg per square meter. This is equivalent to 0.12 tons per square meter at that thickness.
The weight of 1 square meter in tons depends on the material and its density. To calculate this, you would need to know the thickness of the material in meters and its density in tons per cubic meter. By multiplying the area (1 square meter) by the thickness and density, you can determine the weight in tons. For example, if you have a material with a density of 2 tons per cubic meter and a thickness of 0.1 meters, then 1 square meter would weigh 0.2 tons.
To convert pounds per square foot to metric tons per square meter, you would use the following conversions: 1 pound per square foot is approximately 0.0479 metric tons per square meter. Therefore, 350 pounds per square foot is approximately 16.765 metric tons per square meter.
Divide by 9.81
Since 1 kilonewton equals 0.112 tons, 80 Kn is equal to 8.96 tons.
Of water one tonne
example how many kilograms is 6 tons 6 x 907.18474 = 5443.10844 Kg
Converting square meters to tons is not a direct conversion as square meters measure area, while tons measure weight. To convert square meters to tons, you need to know the density of the material in question. The formula for this conversion is: weight (in tons) = area (in square meters) x density (in tons per square meter). This calculation allows you to determine the weight of a specific area based on the material's density.
To convert cubic meters (m³) to tons, you need to know the density of the material you are converting, as tons measure weight while cubic meters measure volume. The formula is: tons = cubic meters × density (in tons per cubic meter). For example, if the density of the material is 2 tons/m³, then 1 m³ would equal 2 tons. Always ensure to use the correct density corresponding to the specific material for accurate conversion.
A tonne is a unit of mass; a square meter is a unit of area. You only "convert" units of the same kind.
The weight of 1 square meter depends on the material and its thickness or density. For example, if you're referring to a square meter of concrete, it could weigh about 2.4 metric tons per cubic meter, depending on the specific mix. To convert square meters to metric tons, you need to know the material's density and the thickness of the layer being measured. Without that information, it’s not possible to provide a specific answer.
1/2 ton of refrigeration
Converting 8000 pounds to tons would result in 4 tons, since 1 ton is equal to 2000 pounds.