The drum should measure 23 inches diameter 36 inches height These are all external measurements.
More data is required. I assume the drum has the form of a cylinder; the volume of a cylinder is calculated as pi x radius squared times height. Different combinations of radios and height can give the same volume.
May depend on the drum, but on average 44 pounds
This is a ratio: whatever : treat 1 gallon : 1000 gallon ? gallon : 25 gallon First find out how much treats 1 gallon (divide both sides by 1000): 1 ÷ 1000 gallon : 1000 ÷ 1000 gallon → 0.001 gallon : 1 gallon Now find out how much treats 25 gallons (multiply both sides by 25) 25 × 0.001 gallon : 25 × 1 gallon → 0.025 gallon : 25 gallon → you need 0.025 gallons.
Approximately 458 pounds.
A 35 gallon drum is equivalent to 132.49 liters. Which is also equivalent to 4,448 ounces, most commonly 280 pounds.
Its diameter is twice its radius
Measure the height of the drum with a tape measure. Divide the total height by 5. Multiple this result by 4. This will tell you how high the water must be in the drum to make 4 gallons. Make a mark on the inside of the drum at that height and fill the drum to the mark. Fill up the drum and then pour out one gallon.
V=(πD2/4)h where D is the diameter of the 55 gallon drum and h is the height of the oil. Or if you prefer V=(2πr2h where r is the radius of the drum and h is as above.
The drum should measure 23 inches diameter 36 inches height These are all external measurements.
You pour four gallons into the five gallon drum, and take the ten gallon drum with the other four gallons of oil in that.
More data is required. I assume the drum has the form of a cylinder; the volume of a cylinder is calculated as pi x radius squared times height. Different combinations of radios and height can give the same volume.
Fill the 5-gallon drum. Pour the contents into the 3-gallon drum, filling it. Now you have 2 gallons left in the big one.Empty the 3-gallon drum. Pour the 2 gallons into it. At this point there is room for one more gallon.Now refill the 5-gallon drum and pour off as much as it takes to fill up the small one. That means you are removing one gallon.Now you have exactly 4 gallons in the 5-gallon drum.or Fill the 3 gallon drum. Pour the contents into the 5 gallon drum. Refill the the 3 gallon drum and pour the contents into the 5 gallon drum until it is full. Empty the 5 gallon drum. You have 1 gallon left in the 3 gallon drum. Pour the remaining 1 gallon into the 5 gallon drum. Re-fill the 3-gallon drum and pour that into the 5 gallon drum giving you 4 gallons. or Tip the 5 gallon drum and fill it until water is level to both the bottom and spilling out the top; next do the same with the 3 gallon drum; then pour the half full 3 gallon drum into the half full 5 gallon drum, rusulting in 2.5 plus 1.5 equals 4 gallons! orWatch Die Hard 3 for the answer.
pi*radius2*height = volume in cubic units pi*12.52*48 = 23561.9449 cubic inches
A 150-gallon drum contains 0.0036 gallon per cubic inch.
One gallon of paint weighs approximately 8.33 pounds. Therefore 55 gallons would weigh 458.15 pounds. Factoring in a weight of 25 pounds for the drum, the total would be about 483.15 pounds.
There are approximately 0.67 cubic feet in a 5 gallon bucket and 7.35 cubic feet in a 55 gallon drum.