7 mm
The answers depend on the tool with which you measure the width and length: W and L units. Find the smallest unit you can measure with the tool, e units. Then maximum width = W + e/2 units, minimum width = W - e/2 units, maximum length = L + e/2 units, minimum length = L - e/2 units.
36 feet
First, you decide how many intervals you need. (Can be between 5-15). Then, you find the range (Max-Min=Range) Next you divide the range by the amount of intervals you wanted. The quotient is the width of your data Example: Intervals(Width=10 and Minimum=28)(When you add the width to the minimum, you should count the minimum too. Instead of 28+10=38, it would be 37 since the 28 count, and to check the answer you have to add ten going down) 28-37 38-47 48-57 58-67 68-77
The height of scaffold tower is four (4) times the minimum base width.
To build an attic catwalk, you will need to measure the space in your attic and determine the length and width of the catwalk. Use sturdy wood or metal planks to create the floor of the catwalk, ensuring they are securely attached to the attic joists for stability. Add handrails on either side for safety, and consider adding lighting to make the catwalk easier to navigate.
minimum width is like 10 cm and length is like 20 cm
36"
Malaysia minimum lane width is 2.75 meter according to JKR U2 and this width only applicable for local streets lane they have pavement roads.
1.2metres
the width required for building code space is a minimum of 30 inches.
no
17 inch
Never exceeds the minimum requirements for length and width
i think it depends on the width of the truck i have allocated 1.5m into our factory
Project Catwalk was created in 2006.
Up on the Catwalk was created in 1984.