Q: What is the pipe diameter for 100 liters per minute flow of water?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

Let me try and give you a hint. There is something called fluid flow formula. You basically need to know the speed at which the water is flowing and (in this case) the hose length and diameter. Well, it depends on how fast the water is running. Get a clock. Start filling a 10 liter bucket and stop after one minute. Is the bucket full (10 liters per minute), or half full (5 liters per minute)? Or did the bucket fill in half a minute (20 liters per minute)? The answer is in your hands (or in your bucket).

Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.

There is no way to tell as the rate of flow is only partially influenced by pressure and there are many other contributing factors such as the diameter of a pipe or the viscosity of a liquid.

cubic feet per hour (cu ft/h of flow rate) is the same as 14 4/25 Liters per minute (L/min / flow rate).

A cubic foot per minute is a measure of flow whereas a litre is a measure of volume. The two measure different things and so there is no conversion between the two without additional information.

Related questions

Voltage

Let me try and give you a hint. There is something called fluid flow formula. You basically need to know the speed at which the water is flowing and (in this case) the hose length and diameter. Well, it depends on how fast the water is running. Get a clock. Start filling a 10 liter bucket and stop after one minute. Is the bucket full (10 liters per minute), or half full (5 liters per minute)? Or did the bucket fill in half a minute (20 liters per minute)? The answer is in your hands (or in your bucket).

To calculate the flow rate in liters per minute, first convert 25 seconds to minutes by dividing by 60 (25 seconds / 60 = 0.4167 minutes). Then, divide the volume (4 liters) by the time in minutes (0.4167 minutes) to get the flow rate: 4 liters / 0.4167 minutes ≈ 9.6 liters per minute.

The quauntity in liters is five times the water flow rate in liter/minute.

Can't say because this depends on the flow coming out of the shower head. If the flow is 1ltr per minute then in 10 minutes you will use 10 litres The average shower in the US flows at a rate of 7.9 liters per minute, or 2.1 gallons per minute. A ten minute shower would consume 79 liters or 21 gallons of water.

Faucet flow rates can vary, but a typical household faucet in the US might flow at a rate of 2.2 gallons per minute, which is approximately 8.3 liters per minute.

liters per minute

what is the discharge flow of 10m/s passing from 2ft pipe

The amount of water a hosepipe uses depends on its flow rate, which is measured in liters per minute or hour. To calculate the total amount of water used, you would need to know the flow rate and the duration the hosepipe is run.

To convert water flow to air flow, you need to know the relationship between the two substances. Since air is less dense than water, you cannot directly convert liters of water flow to liters of air flow. You would need to consider factors such as pressure, temperature, and the specific densities of water and air to make a more accurate conversion.

There is no way to tell as the rate of flow is only partially influenced by pressure and there are many other contributing factors such as the diameter of a pipe or the viscosity of a liquid.

5 imperial gallons per minute