answersLogoWhite

0

The plus and minus on the Chevy Equinox gear shift indicate manual shifting mode, allowing the driver to control gear selection. The plus (+) is used to upshift, while the minus (-) downshifts, providing a more engaged driving experience, particularly in situations like overtaking or navigating steep terrain. This feature can enhance performance and control compared to standard automatic shifting.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Continue Learning about Math & Arithmetic

What is the shift pattern of the 1998 KX250 1up and 5 down or 1 down 5 up?

The shift pattern for the 1998 KX250 is typically 1 down and 5 up. This means the rider shifts down to engage first gear and then shifts up through the gears, with the last gear being fifth. This configuration is standard for most motocross bikes, allowing for easier gear transitions while riding.


What does the E stand for on the stick shift of the 1983 VW Rabbit?

It stands for 5th gear. I think it was a VW marketing ploy to show that the 5 speed car is Economical when using the "E" gear.


What cause a 700r4 to hold gear longer than it sud?

Answerlow or no trans flud. bad torque converter causing the trans to slipcheck the kick down cable,also known as the detent cable.. that will also change the shift patterns to eather shift too soon or too late...


Have 350 Chevy with throttle body injection and chip and low gear rear end In the quarter mile and only get 79 mph and at the half way point of the quarter it drops off then picks up at the finish?

Depending on your weight, power, and transmission I would say that u need to change your Gear Ratios.


Why does your 4 lo work but not your 4 hi?

The issue with 4 Hi not working while 4 Lo does could stem from several factors, such as a malfunctioning transfer case, a problem with the shift linkage, or issues with the vehicle's electronic control system. In 4 Lo, the system engages a lower gear ratio, which can bypass some issues that might prevent the higher gear ratio from engaging in 4 Hi. Additionally, there may be problems with the front axle engagement or insufficient traction, preventing the shift into 4 Hi. A thorough inspection of the drivetrain and related components is recommended to identify the exact cause.

Related Questions

What does m stand for on Chevy Equinox gear shift?

The M on the gearshift of a Chevy Equinox stands for manual. The Chevy Equinox comes with a manual mode for using the gearshift like a manual transmission on an automatic.


What does the plus minus button on gear selector for 2005 Chevy Malibu do?

It allows you to manually shift the transmission when the selector is in the L position.


97 Chevy z71 truck wont shift into 3rd gear?

97 Chevy Z71 truck will not shift into third gear.


Why will your 2003 Chevy Trailblazer not shift out of ad?

03 chevy trailblazer gear shfiter moves but truck does not go in gear


What if your 99 Chevy 4x4 wauto trans won't shift into high gear?

If the transmission on a 1999 Chevy 4x4 will not shift into high gear, there could be a problem with the shift solenoid. There could also be a problem with a broken belt inside the transmission.


1998 Chevy Malibu has to be warm to shift into gear?

Check your transmission.


Why won't an automatic Chevy Tahoe shift into gear?

Zubie make her dance!


Where is the shift Solenoid B on a 2004 Chevy Silverado?

wont kickdown into passing gear


1999 Chevy siverado shift is hard to move into gear?

Bent shift linkage Frozen shifting linkage - try lubricating


What is wrong when you cannot get your gear shift to com out of park on a Chevy pickup?

footbrake deactivation switch


Why wont 1994 Chevy Camaro shift out of 3rd gear?

It's Broken ya tard!


What causes a 1983 Chevy s10 to have grinding when trying to shift into a gear?

Burned or worn out synchronizers