In cricket, a "valiant 265" typically refers to a team scoring 265 runs, often in a challenging match situation. The points gap would depend on the context of the match, including the target set by the opposing team and the current score. If the opposing team has scored more than 265 runs, the points gap would be the difference between their score and 265. If they have scored less, there would be no gap, as a team cannot lose points for scoring below 265.
To set the points gap on a 1977 KZ650, first, remove the left side cover to access the points. Use a feeler gauge to measure the gap while rotating the engine to align the points at their widest opening. The gap should be set to approximately 0.014 inches (0.35 mm). Once adjusted, tighten the points screws and recheck the gap to ensure it remains correct.
265 = 265/1
40% of 265= 40% * 265= 0.4 * 265= 106
The points gap for a 1967 Ford Galaxy 500 with a 390 engine is typically set at 0.019 to 0.021 inches. This gap ensures proper ignition timing and efficient engine performance. Always refer to the specific service manual for your vehicle for the most accurate specifications.
265-225 = 40
0.012 to 0.016" or 0.3 to 0.4 mm
.035 spark plug gap, .02 point gap.
Answers.com made a valiant effort to find a proper answer to the question; "what is the spark plug gap for a Plymouth Valiant?" an early economy car built in America; but named after a heroic comic character from England of King Arthur fame; named Prince Valiant.
Dist. Points gap is .016" (0.4mm)
To set the points gap on a 1977 KZ650, first, remove the left side cover to access the points. Use a feeler gauge to measure the gap while rotating the engine to align the points at their widest opening. The gap should be set to approximately 0.014 inches (0.35 mm). Once adjusted, tighten the points screws and recheck the gap to ensure it remains correct.
The dwell for the points should be 30 degrees. The spark plug gap should be .040".
points gap on a 76 volkswagen beetle
That year engine does not have POINTS.
ALL HARLEYS WITH POINTS HAVE THE SAME POINT SPECS:.018"POINT GAP AND.025"PLUG GAP..
To set the ignition points gap on a 50cc Malaguti, first remove the flywheel cover to access the ignition points. Use a feeler gauge to measure the gap between the points, which should typically be set to around 0.35 mm (0.014 inches). Adjust the gap by loosening the screws securing the points and carefully moving them until the correct gap is achieved, then tighten the screws. Always double-check the gap after adjustments to ensure proper ignition timing.
0.020 for the points gap, spark plug gap 0.028 -0.033
All the small Briggs engines seem to have a points gap of 0.02 inches