0
What else can I help you with?
What Uses the 2.4 GHz frequency band and provides a maximum theoretical throughput of 54 Mbps?
The 2.4 GHz frequency band is commonly used by Wi-Fi networks that operate under the IEEE 802.11g standard, which provides a maximum theoretical throughput of 54 Mbps. This frequency is also used by various other devices, such as cordless phones, microwaves, and Bluetooth devices. However, it's important to note that actual throughput can be lower due to interference and environmental factors.
What correlation does bandwidth have to throughput?
Bandwidth refers to the maximum data transfer capacity of a network connection, while throughput is the actual amount of data transmitted over that connection in a given time period. Generally, higher bandwidth can lead to higher throughput, but factors like network congestion, latency, and protocol overhead can affect this relationship. Therefore, while bandwidth sets the potential upper limit for throughput, real-world conditions often result in throughput being lower than the available bandwidth.
What line has a maximum throughput of 1.544 mbps?
T1 line
How do you calculate the throughput in wsn?
Throughput in a Wireless Sensor Network (WSN) can be calculated by measuring the amount of data successfully transmitted over a network during a specific time period. It is typically expressed in bits per second (bps). The formula to calculate throughput is: [ \text{Throughput} = \frac{\text{Total Data Delivered}}{\text{Total Time Taken}} ] To get an accurate measurement, consider only the data that reaches the destination successfully, excluding retransmissions or lost packets.
What is the meaning of theoretical?
Theoretical: pertaining to, or consisting in theory
What is the theoretical maximum throughput for 802.11b?
11 Mbps
What wireless technology has the highest maximum theoretical throughput?
d. 802.11n
What wireless technology boast the highest maximum theoretical throughput?
802.11n.
What Uses the 2.4 GHz frequency band and provides a maximum theoretical throughput of 54 Mbps?
The 2.4 GHz frequency band is commonly used by Wi-Fi networks that operate under the IEEE 802.11g standard, which provides a maximum theoretical throughput of 54 Mbps. This frequency is also used by various other devices, such as cordless phones, microwaves, and Bluetooth devices. However, it's important to note that actual throughput can be lower due to interference and environmental factors.
Broadband cable requires many subscribers to share the same local line thus raising concerns about what and actual-versus theoretical-throughput?
Security.
What is the meaning of throughput in oil and gas industry?
Throughput in Oil & gas industry
What is asymmetrical communication?
In asymmetrical communication, downstream throughput is higher than upstream throughput.
What is the throughput rate for SDRAM PC133?
The throughput rate for SDRAM PC133 is 1.06 gigabytes per second (GB/s) per pin, as it operates at a clock speed of 133 MHz with a 64-bit data bus. This means it can transfer data at a rate of 8 bytes per clock cycle. When considering the full width of the bus, the maximum theoretical bandwidth reaches approximately 1.06 GB/s.
Which has the highest throughput simplex full duplex or half duplex?
Full duplex has the highest throughput concering communication.
If motherboard has 10 USB 2 ports is 480 mbps the max theoretical throughput of all USB devices on all ports or can 10 USB ports operate at 480 mbps concurrently?
If they are all individually powered, but if they are on a splitter or hub that with no booster, then they will be fractionary.
What might cause a 100Base-TX network to experience an average throughput of less than 100 Mbps?
100 Mbps is a theoretical limit and never could be achieved. Also, if you are running half-duplex or/and shared channel it would decrease performance significantly.
What is the average throughput for gigabit network connection?
The throughput of a gigabit network connection can vary somewhat based on things such as the speed of the CPU, however, the average throughput is around 300Mb/s. The symbol for giga is G.
