To calculate the total surface area of a cylindrical tank, you use the formula ( A = 2\pi r(h + r) ), where ( r ) is the radius and ( h ) is the height. Given the diameter of 6 inches, the radius ( r ) is 3 inches. However, the height of the tank is not provided, so we cannot compute the total surface area without that information.
What is the total surface area of a coffee can that is a right circular cylinder that holds 2 pounds of coffee and had a diameter of 6 inches and a height of 6 1/4 inchesImproved Answer:-It is: (2*pi*32)+(6*pi*6.25) = 174.358 square inches to 3 decimal places
To calculate the outside diameter of a roll of carpet, you can use the following formula: Outside Diameter (in inches) = √[(Weight in pounds / (Width in feet x Length in feet)) * 32] In your case: Weight = 1000 pounds Width = 12 feet Length = 180 feet Outside Diameter (in inches) = √[(1000 / (12 x 180)) * 32] Outside Diameter ≈ √[(1000 / 2160) * 32] Outside Diameter ≈ √(0.1481 * 32) Outside Diameter ≈ √4.7392 Outside Diameter ≈ 2.18 inches So, the outside diameter of a 1000-pound roll of carpet that is 12 feet by 180 feet is approximately 2.18 inches.
Inches and pounds have nothing to do. Inches are units of distance/length, pounds are units of weight.
It will bend at any load greater than zero. It is just a question of how much. In your example the rod will bend 0.007 inches under 10 pounds, 0.07 inches under 100 pounds, etc.
First find the volume, then multiply by the density of lead. Density of lead = 0.41 pounds per cubic inch.Volume = (area of base) * (length) = (pi * r2) * (length) = 3.14 * (0.75 in / 2)2 * (3 in) = 1.32 in3. Then (0.41 lb / in3) * (1.32 in3) = 0.54 pounds, or 8.6 ounces
What is the total surface area of a coffee can that is a right circular cylinder that holds 2 pounds of coffee and had a diameter of 6 inches and a height of 6 1/4 inchesImproved Answer:-It is: (2*pi*32)+(6*pi*6.25) = 174.358 square inches to 3 decimal places
The dimensions for a 20 gallon drum is 21.75 inches high, 18.25 inches inside diameter, and 18.75 inches outside diameter. It can accommodate a load of 199 pounds.
Sputnik 1 was about 58 centimeters (23 inches) in diameter and weighed around 83.6 kilograms (184 pounds).
A cubic inch of lead is about 0.4 pounds. So 10 pounds would be about 25 cubic inches which would make a ball about 3.6 inches in diameter. That is slightly larger than a softball.
The ball measures between 8.5 inches to 8.595 inches across (diameter) and can weigh no more than 16 pounds - there is no minimum weight specified
To calculate the outside diameter of a roll of carpet, you can use the following formula: Outside Diameter (in inches) = √[(Weight in pounds / (Width in feet x Length in feet)) * 32] In your case: Weight = 1000 pounds Width = 12 feet Length = 180 feet Outside Diameter (in inches) = √[(1000 / (12 x 180)) * 32] Outside Diameter ≈ √[(1000 / 2160) * 32] Outside Diameter ≈ √(0.1481 * 32) Outside Diameter ≈ √4.7392 Outside Diameter ≈ 2.18 inches So, the outside diameter of a 1000-pound roll of carpet that is 12 feet by 180 feet is approximately 2.18 inches.
If you weigh 90 pounds on the surface of the earth, you would weigh about101 pounds on the surface of Neptune.Unfortunately, your height would not change on Neptune. In spite of yourhistoric accomplishments in space travel, you would still be only 4 inches tall,and your luck at meeting girls would not improve.
A 60 liter drum typically has an inner diameter of 380 mm and an outer diameter of 395 mm. The height is 575 mm, and the weight is 4,1 kg. In US measurements the inner diameter is 14.96 inches, the outer is 15.55 inches, and the height is 22.64 inches. The weight is 9.04 pounds.
You need 4.27 cubic feet. Weight in pounds is deceptive for sand depending on how wet or dry the sand is.
About 80 pounds, or 36 kilograms. It is also about 3 feet long, and 20 inches in diameter.
The Sputnik-1 satellite was approximately 58 centimeters (23 inches) in diameter and weighed about 83.6 kilograms (183.9 pounds).
217147