I believe it is 8000 in.3
1/8th of a cubic inch
A 41 inch cube is 41X41X41 inches. 413=68921 cubic inches. A 41 inch cube can be cut into 68921 one-inch cubes.
To find Volume one must multiply the width by length by height. V=WxLxH Since every side of a cube is equal, the the equation would look like V=1x1x1 Therefore the Volume is 1 cubic inch
5x5x5=125 and 3x3x3=27 add them to get the combined volume of 152 in^3
One way to find out the number of cubes that can fit inside a rectangular box is to use its volume. Knowing the volume of the cubes and that of the box can give an accurate reading of the cubes that can fit.
1/8th of a cubic inch
Edge of the larger cube = 32 cm Volume of the larger cube = (32 cm)3 = 32768 cm3 Edge of the smaller cube = 4 cm Volume of the smaller cube = (4 cm)3 = 64 cm3 Since the smaller cubes are cut from the larger cube, volume of all of them will be equal to that of the larger cube. ∴ Total number of smaller cubes × Volume of the smaller cube = Volume of the larger cube ⇒ Total number of smaller cubes = Volume of the larger cube ÷ Volume of the smaller cube ⇒ Total number of smaller cubes = 32768 ÷ 64 = 512 Thus, 512 smaller cubes can be cut from the larger one.
Eight half inch cubes would fill a one inch cube.
A 41 inch cube is 41X41X41 inches. 413=68921 cubic inches. A 41 inch cube can be cut into 68921 one-inch cubes.
To find Volume one must multiply the width by length by height. V=WxLxH Since every side of a cube is equal, the the equation would look like V=1x1x1 Therefore the Volume is 1 cubic inch
5x5x5=125 and 3x3x3=27 add them to get the combined volume of 152 in^3
There is only one edge piece on 3x3x3s.
A cubic centimeter of space is a measure of volume. It is the volume marked out by a cube that is one centimeter on an edge. There are about 2.54 centimeters in an inch, so the cube will be a bit less than half an inch cubed, or a cube a bit less than half an inch on an edge.
To find the volume of a stack of centimeter cubes you only need to have the dimension of one side. Once you get the dimension of one side you can find its cube to get the volume of the stack.
A cubic inch is one inch, by one inch, by one inch. -Visualise a square box, an inch each side.
One way to find out the number of cubes that can fit inside a rectangular box is to use its volume. Knowing the volume of the cubes and that of the box can give an accurate reading of the cubes that can fit.
If the length of one edge of a cube is 10cm its volume is: 1,000 cm3