Well, if the measuring jug is large enough, all you need to do is fill it with water high enough that you can completely submerge yourself. Measure the water level before and after you get in, using the marking pencil. The distance between the two marks is your volume.
It can be.
Either: 1) Find the radius of each marble and thus their volume through V = 4/3 x pi x r^3 and then add the volumes up. or 2) Put all the marbles in a measuring jug and fill it up to the top. Pour the water into a separate container and empty the marbles out of the jug. Pour the water back into the jug. Thus: Volume of water with marbles - volume of water without the marbles = volume of marbles
To calculate the number of dimes that can fit in a 5-gallon jug, we need to determine the volume of a dime and then divide the total volume of the jug by the volume of a single dime. The volume of a dime can be approximated by its dimensions, which are about 1.35 mm in thickness and 17.91 mm in diameter. Using the formula for the volume of a cylinder (V = πr^2h), we can estimate that a dime has a volume of about 0.0000000007 cubic meters. A 5-gallon jug is equivalent to approximately 0.0189 cubic meters, so dividing the volume of the jug by the volume of a dime gives us an estimate of around 27 billion dimes that can fit in a 5-gallon jug.
Fill the beaker with water, then pour it into a calibrated measuring jug
I would use a large, graduated measuring jug for this.I would use a large, graduated measuring jug for this.
Yes, a large jug of milk can be measured in liters. Liters are a common unit of volume measurement used for liquids like milk. The volume of the jug would indicate how many liters of milk it can hold.
A large jug for holding water or any liquid is a Pitcher. Or a Ewer, which is a large jug holding water for washing
You would use volume to see how much juice is in a jug.
find a jug just wide enough to fit the whole potato. Find a measuring jug that the jug fits into. Fill the first jug with water and put it into the empty measuring jug. Place the potato into the full jug. Let the water spill into the measuring jug. Take the first jug out and the amount of water that spilled out is equal to the volume of the potato. This is called displacement and was devised by Archimedes.
Get a measuring jug that will hold the marbles easily. Half fill the measuring jug with water. Note the volume reading on the measuring Jug scale (measurement A). Add the marbles. Note the new water level reading on the measuring jug scale (measurement B).Subtract measurement A from measurement B, the answer is the volume of the marbles.
Well, if the measuring jug is large enough, all you need to do is fill it with water high enough that you can completely submerge yourself. Measure the water level before and after you get in, using the marking pencil. The distance between the two marks is your volume.
Beaker, flask, jug.
A 2.5 liter jug is equivalent to 2500 ml. To find out how many 250 ml cups can be filled from this jug, you simply divide the total volume of the jug by the volume of each cup. In this case, 2500 ml divided by 250 ml equals 10 cups. Therefore, you can fill 10 cups with a volume of 250 ml each from a 2.5 liter jug.
A half jug of hot water would cool down faster than a full jug of hot water. This is because there is less water volume in the half jug, meaning it will lose heat quicker.
a large jug with a wide mouth
You pour it into a measuring jug and see where the top of the liquid comes up to on the jug's measuring scale.