Vol = 10m*20m*1m = 200 m3
The volume of a 300mm diameter by 600mm deep cylinder is: 42,412,000 mm3
Well let's see, 7 feet times 4 feet times 2.5 feet equals 70 square feet of storage volume.
To calculate the volume of a hole that is 6 feet wide and 6 feet deep, you would use the formula for the volume of a cylinder: Volume = π × radius² × height. The radius is half the width, so it would be 3 feet. Thus, the volume of the hole is approximately 3.14 × (3)² × 6, which equals about 169.56 cubic feet. Since there are 7.48 gallons in a cubic foot, the hole can hold approximately 1,267 gallons of water.
To calculate the volume of gravel needed, first convert the dimensions to feet: 36 inches is 3 feet deep, and 16 inches is approximately 1.33 feet wide. The volume can be calculated using the formula for volume: length × width × depth. Therefore, the volume is 5,500 feet × 1.33 feet × 3 feet, which equals approximately 21,915 cubic feet of gravel needed to fill the ditch.
Assuming 11 feet is the diameter of the tank, the volume will be 11 times pi times 2, in cubic feet. That equals 69.115 cubic feet (rounded to 3 decimals), which equals 517.016 gallons.
volume of a clylinder= pi(r^2)h plug in values= pi(.5^2)(5) equals about 3.92 cubic feet
The volume of a 300mm diameter by 600mm deep cylinder is: 42,412,000 mm3
volume
Well let's see, 7 feet times 4 feet times 2.5 feet equals 70 square feet of storage volume.
To calculate the volume of a hole that is 6 feet wide and 6 feet deep, you would use the formula for the volume of a cylinder: Volume = π × radius² × height. The radius is half the width, so it would be 3 feet. Thus, the volume of the hole is approximately 3.14 × (3)² × 6, which equals about 169.56 cubic feet. Since there are 7.48 gallons in a cubic foot, the hole can hold approximately 1,267 gallons of water.
The volume is 0.7854 m3
The volume of an area 24 feet round and 45 inches deep is: 1,700 cubic feet.
To calculate the volume of gravel needed, first convert the dimensions to feet: 36 inches is 3 feet deep, and 16 inches is approximately 1.33 feet wide. The volume can be calculated using the formula for volume: length × width × depth. Therefore, the volume is 5,500 feet × 1.33 feet × 3 feet, which equals approximately 21,915 cubic feet of gravel needed to fill the ditch.
Assuming 11 feet is the diameter of the tank, the volume will be 11 times pi times 2, in cubic feet. That equals 69.115 cubic feet (rounded to 3 decimals), which equals 517.016 gallons.
That is 10 x 10 x 20, so the answer is 2,000 cubic feet.
Morgan Freeman starred in The Shawshank Redemption, Deep Impact and Bruce Almighty. He was not in Pump Up the Volume.
Volume = pi * radius^2 * height