what is the weight of salt water of one cubic meter
salt water has more mass because of the added salt so salt is heavier :)
97% of the worlds water is Salt water. 71% of the world is Covered by Saltwater.
the ocean. water from the ocean evaporates into the air, ocean water has salt in it.
The independent variable for salt in boiling water is the amount of salt added to the water. This variable is manipulated to observe its effect on other factors, such as the boiling point of the water or the time it takes for the water to reach a boil. By changing the quantity of salt, researchers can study how it influences the boiling process.
Salt is an uncountable noun. It refers to a substance that cannot be counted in individual units but rather measured by weight or volume. For example, we say "a pinch of salt" or "a bag of salt" rather than "two salts."
Salk cake = 1442 Salt course = 801 Salt fine = 1201 The weight and density of other bulk items can be found at: http://www.simetric.co.uk/si_materials.htm
The weight of sea water really depends on a number of variables, including the temperature, the amount of salt (salinity) and whatever other foreign items may be present, and the depth, thus the pressure. But to get to the basic answer, seawater, at the surface, on average weighs 1027 kg/m3, or just over 64.1 lbs per cubic foot. ----------- The question is another way of asking for density of salt water. Salt water has greater density than that of fresh water, due to the dissolved salt. Fresh water has a density of 1000 kg/cubic meter vs. an average density of 1027 kg/cubic meter for ocean salt water.
Fresh water at a temperature of 10 degrees Celsius has a density of 999.70 kilograms per cubic meter or 0.9997 grams per cubic centimeter. Sea water with a salinity of 3.5 percent at a temperature of 10 degrees Celsius has a density of 1026.98 kilograms per cubic meter or 1.02698 grams per cubic centimeter.
The density of seawater varies from 1020 to 1029 kg/cubic meter, with 1027 kg/cubic meter being cited most often for water at the ocean's surface. There are 1,000 liters per cubic meter, so the density of seawater can also be expressed as 1.027 kg/liter (for surface seawater). Thus 1 liter of seawater will weigh 1.027 kg.
11 cubic feet of plain (non-salt) water weighs approximately 686.7 pounds or 311.5 kilograms.
There are a number of variables which will determine the exact weight. It is generally accepted that the weight is 64lbs per cubic foot
Yes, fresh water of 10 degrees Celsius has a density of 999.728 kilograms per cubic meter. Seawater of 10 degrees Celsius and of 3.5 % salinity has a density of 1026.978 kilograms per cubic meter.
The Dead Sea is known for its extremely high salinity, containing approximately 300 to 400 grams of salt per liter of water. This translates to about 300,000 to 400,000 grams (or 300 to 400 kilograms) of salt per cubic meter of water. This high salt concentration is primarily due to the evaporation of water in the region, leaving behind a dense solution of salts and minerals.
Fresh water at a temperature of 10 degrees Celsius has a density of 999.70 kilograms per cubic meter or 0.9997 grams per cubic centimeter. Sea water with a salinity of 3.5 percent at a temperature of 10 degrees Celsius has a density of 1026.98 kilograms per cubic meter or 1.02698 grams per cubic centimeter.
A penny as everyone I'm sure knows cannot float in regular water. As for salt water a penny should in theory not be able to becase the regular pennys bouancy is not great enough to support the weight of the penny regardless of the salt to water ratio. A penny is too dense to be able to float in salt water, regardless of the salinity of the solution.
About 2.2 pounds of salt in a cubic foot of sea water. There are about 7.48 gallons in a cubic foot and sea water weighs about 8.5 pounds per gallon (63.58 pounds). Sea water is about 3.5 % salt (usually reported as 35 ppt or parts per thousand). So 63.58 x .035 = 2.2 pounds of salt.
A desaliter is a unit of measurement used to quantify the salt content of water or other liquids. One desaliter is equal to 10 grams of salt per cubic meter of water.