If this is a horizontal area, it must be its height.
relief
Seat height is the seat And overall height is to the tallest point on the bike, like the bars
There is no any such difference between Aniline point and mixed Aniline point . . . . .
Height and length are measurements. Height is usually the distance from an objects upper-most point to its lowest. Length is usually the distance from one side of an object to the other.
Reduced level (RL) is calculated by determining the elevation of a point relative to a reference datum, typically mean sea level. To find the RL, you can use leveling instruments to measure the height differences between the point and a known benchmark. The formula is RL = Benchmark RL ± Height Difference, where you add or subtract the height difference based on whether you're measuring up or down from the benchmark. This provides the elevation of the point in relation to the reference datum.
relief
wave height. -- The highest point of a wave is known as its crest while the trough is the lowest point of the wave. Wavelength is the horizontal distance between successive crests or troughs. by: Claire O.
sag is the difference between the point of support to the lowest point of the conductor.
Relief is the change in elevation in a region and measures the difference between that area's highest and lowest elevation. Elevation is the distance above or below sea level that a region is.
The difference between the highest and lowest point of the surface of the water.
In science, elevation refers to the height of a point above a reference level, usually sea level. Relief, on the other hand, is the difference in elevation between the highest and lowest points in a particular area, indicating the variation in terrain height. Together, elevation and relief provide important information about the topography and geographical features of a region.
Seat height is the seat And overall height is to the tallest point on the bike, like the bars
Florida is the flattest state in America, with a difference of only 345 feet between its highest point (345 feet) and lowest point (sea level).く
The difference in level between the height of the mould and that of the highest point of the subsided concrete is measured. This difference in height in mm. is taken as Slump of Concrete.
The difference in feet between the minimum and maximum heights of a car on a Ferris wheel will be the diameter of the Ferris wheel. You might want to add the height of a car above ground at its lowest point to be technically correct.
Determining which state is "lowest" is equally problematic. For instance, Florida has the lowest high point and the least difference between highest and lowest point; has the lowest mean elevation; and California has the lowest point in the United States-Death Valley's Badwater, at 282 ft (86 m) below sea level.
The difference between the highest and lowest points on a map is known as the elevation range. It indicates the vertical distance between the highest and lowest elevation points on the map, providing insight into the topographical diversity of the area represented. This range is important for understanding the relief and terrain variations within the map area.