0
Which formula would you use when you are looking for the slope of a line and give two points of the line?
To find the slope of a line given two points, you can use the formula ( m = \frac{y_2 - y_1}{x_2 - x_1} ), where ( (x_1, y_1) ) and ( (x_2, y_2) ) are the coordinates of the two points. This formula calculates the change in the y-values divided by the change in the x-values, giving you the slope ( m ) of the line.
What else can I help you with?
What is the slope of a line with points at (3-3) and (5-1)?
(y2 - y1)/(x2 - x1) is the formula for the slope of a line. In this case, the formula with the points plugged-in would be (-1 - (-3))/(5 - 3). Simplified, the slope is 1. Of course, the order in which you plug-in the coordinates doesn't affect the slope of the line.
What is the slope of the line shown below (-25) and (3-5)?
To find the slope of the line passing through the points (-25) and (3, -5), we use the slope formula ( m = \frac{y_2 - y_1}{x_2 - x_1} ). Assuming the points are (-25, y1) and (3, -5), we need the y-coordinate for the first point to calculate the slope. If y1 is given, substitute the coordinates into the formula to find the slope. If the first point is actually (-25, 0), the slope would be ( m = \frac{-5 - 0}{3 - (-25)} = \frac{-5}{28} ).
What is the equation to find the slope between two points?
If our two points were (x1,y1) and (x2,y2). We'd remember slope is rise over run. We'd have (y1-y2)/(x1-x2). Plug in your numbers, and you would have the slope of the line between these two points.
What is the slope of -4 4 and 0 2?
If those are the x-y coordinates of two points, then they're two points. Two points don't have a slope. In fact, points don't have anything. If we want to play around with two points for a while, one thing we could do with them would be to draw a line segment between them. With these particular two points, the line segment would be about 4.472 long, its slope would be -2, and it would be a piece of the line that intersects the y-axis at y=2 and the x-axis at x=4 .
How do you calculate the slope of a line?
To calculate the slope you would need two points (X1,Y1 and X2,Y2) from the line and then you just plug them into the slope formula and calculate.slope formula m=Y1-Y2 / X1-X2If a line rises by two units and runs (extends) 3 units, the slope is calculated as follows.slope = rise/run = 2/3To determine the rise and the run of a line you need to have the two co-ordinates of at least two points in the line - usually the start and finish.A line with 0,2 and 2,5 on it will have a rise of 2 and run of 3.
What is the slope of a line with points at (3-3) and (5-1)?
(y2 - y1)/(x2 - x1) is the formula for the slope of a line. In this case, the formula with the points plugged-in would be (-1 - (-3))/(5 - 3). Simplified, the slope is 1. Of course, the order in which you plug-in the coordinates doesn't affect the slope of the line.
What is the slope of the line shown below (-25) and (3-5)?
To find the slope of the line passing through the points (-25) and (3, -5), we use the slope formula ( m = \frac{y_2 - y_1}{x_2 - x_1} ). Assuming the points are (-25, y1) and (3, -5), we need the y-coordinate for the first point to calculate the slope. If y1 is given, substitute the coordinates into the formula to find the slope. If the first point is actually (-25, 0), the slope would be ( m = \frac{-5 - 0}{3 - (-25)} = \frac{-5}{28} ).
How do you graph the slope of a function?
For example, if the slope at a certain point is 1.5, you can draw a line that goes through the specified point, with that slope. The line would represent the slope at that point. If you want to graph the slope at ALL POINTS, take the derivative of the function, and graph the derivative. The derivative shows the slope of a function at all points.
Is x over y the formula for slope of a straight line?
M (slope) = (Y2 - Y1) / (X2 - X1) You need two points on a graph to make it a line. If point A is at (0,0) and point B is at (1, 1) then your slope would be M = (1 - 0) / (1 - 0) = 1 / 1 = 1
What is the equation to find the slope between two points?
If our two points were (x1,y1) and (x2,y2). We'd remember slope is rise over run. We'd have (y1-y2)/(x1-x2). Plug in your numbers, and you would have the slope of the line between these two points.
What is the slope of -4 4 and 0 2?
If those are the x-y coordinates of two points, then they're two points. Two points don't have a slope. In fact, points don't have anything. If we want to play around with two points for a while, one thing we could do with them would be to draw a line segment between them. With these particular two points, the line segment would be about 4.472 long, its slope would be -2, and it would be a piece of the line that intersects the y-axis at y=2 and the x-axis at x=4 .
How do you calculate the slope of a line?
To calculate the slope you would need two points (X1,Y1 and X2,Y2) from the line and then you just plug them into the slope formula and calculate.slope formula m=Y1-Y2 / X1-X2If a line rises by two units and runs (extends) 3 units, the slope is calculated as follows.slope = rise/run = 2/3To determine the rise and the run of a line you need to have the two co-ordinates of at least two points in the line - usually the start and finish.A line with 0,2 and 2,5 on it will have a rise of 2 and run of 3.
Point slope 4 5 and -2 0?
The slope of points 4 5 and -2 0 would be about 5/6.
What is an average slope on a topographic map?
The average slope on a topographic map is calculated by dividing the total rise or fall of the terrain by the horizontal distance between two points. It represents the rate of change in elevation over a given distance. A steep slope would have a higher average slope value while a gentle slope would have a lower value.
A (4 4) B (-4 -4) C (4 -4) A line going through which two points would have an undefined slope?
A line will have an undefined slope if it is vertical, which occurs when both points have the same x-coordinate. In this case, points A (4, 4) and C (4, -4) share the same x-coordinate of 4. Therefore, a line going through points A and C would have an undefined slope.
What is the formula for slope?
1.) y=mx + b this formula is slope intercept 2.) m=y2-y1 -------- x2-x1 slope formula, the numbers mean that you take the second point on the y-axis and subract it from the 1st y point. Then you subract the second x pnt and the first x point. After that you divide the y by the x. Example:(4,2) (8,6) are your points 6 is your y2 and 2 is your y1. then 8 is x2 and 4 is the x1. so that means you subtract 6-2 and 8-4 which will give you 4 and 4. Lastly you divide the two numbers...4/4=1. so you slope of those two points would be 1
What is the Equation for finding slope?
Slope is equal to rise over run. If you have two points on a line (x1,y1) and (x2,y2), the slope m would be:m = (y2 - y1) / (x2 - x1)
