7 and 12/1,000 or 7.012
You can write any two-digit decimal as a fraction by putting it over 100 but it's an unnecessary step. 0.39 is greater than 0.27 39/100 is greater than 27/100
both equal 0.75
They're both already there.
4.18 < 4.2 Method to check . Bring both number to the same number of decimal places by inserting 'zeroes' to the right Hence 4.18 & 4.20 ( Both now at 2 d.p). Drop the Decimal pont 418 & 420 It should be clear that 418 < 420 . Hence it follows that 4.18 < 4.2 NB THis method is good for any decimal comparison.
first you can add as many zeros at the end of the decimal as you want so make both have the same number of places after the decimal. 0.5 becomes 0.50 Then 1 place after the decimal is read as tenths, 2 places is hundredths, 3 places is thousandths, etc. So read 0.50 as 50 hundredths, 0.33 is 33 hundredths. Which is larger 50 or 33? 0.5 is greater
You have to think about your decimal places. the first decimal place after the point is the tenths, then the hundredths, then the thousandths. So, if your decimal number has two numbers after the point like 0.25, then you have 25/100. Then you make the fraction smaller by dividing both numbers by 25 and you end up with 1/4.
7 and 12/1,000 or 7.012
2/100 is less than 5/100. When in doubt multiply both by the greatest decimal place. Ex. these both happened to be hundredths. If you had .2 and .05 you would multiply both by 100 leaving 20/100 and 5/100. I hope this makes sense.
You can write any two-digit decimal as a fraction by putting it over 100 but it's an unnecessary step. 0.39 is greater than 0.27 39/100 is greater than 27/100
both equal 0.75
They're both already there.
Yes, 0.015 is greater than 0.005. When comparing decimal numbers, you start by looking at the digit in the highest place value. In this case, both numbers have 0 in the tenths place. Moving to the next decimal place, 0.015 has a 1 in the hundredths place while 0.005 has a 0. Since 1 is greater than 0, 0.015 is indeed greater than 0.005.
4.18 < 4.2 Method to check . Bring both number to the same number of decimal places by inserting 'zeroes' to the right Hence 4.18 & 4.20 ( Both now at 2 d.p). Drop the Decimal pont 418 & 420 It should be clear that 418 < 420 . Hence it follows that 4.18 < 4.2 NB THis method is good for any decimal comparison.
If you look at the tenths place, both numbers have the number 2. Then you look in the hundredths place. 15.21 has the number 1, 15.203 has the number 0. 1 is greater than 0 so 15.21 is greater than 15.203. You don't need to really look at the 3 in the thousandths place in 15.203 because you already see that 15.21 is greater. I hope this answers your question!
They both have the same value.
Divide both by 10 so 60/1,000 = 6/100 = 0.06