To determine if an unmarked pencil has number 2 lead, you can perform a simple test by making a mark on a piece of paper with the pencil. Then, use your fingernail to gently rub the mark. If the mark is dark and shiny, it is likely number 2 lead, as number 2 lead creates a distinct mark that is easily smudged. Additionally, you can also check for the presence of the number "2" or "HB" on the pencil itself, as these markings are commonly used to indicate number 2 lead.
About 3 seconds ago. "Lead" pencils are the graphite ones we use all the time, those yellow things that you sharpen in a pencil sharpener. Lead is dark gray and leaves such a mark on paper. It isn't really lead in the pencil, we just say that.
55Answer:Obviously the answer varies with how heavy a mark you leave and the length of the pencil. Start by assuming that a pencil is 17 cm long and has a diameter of 0.2 cm (which gives a volume of just under 0.55 cm3. If you just touch the paper so the line is 1 layer of carbon atoms thick (about 1 nm) and the full 0,2 cm wide the line would be somewhat under 300 km (180 mi) long. Application of some skill in twisting the pencil so the line is thinner could double or triple the line length.
the function of a pencil is to write with out getting your hands dirty and to be able to write on paper instead of stone.
You start with a pen/pencil and some paper.
Static friction is the type of friction used when writing with a pencil. As the pencil moves across the paper, static friction between the pencil tip and the paper surface enables the pencil to grip and leave a mark.
Yes, a pencil needs friction to write. When you apply pressure to the pencil against the paper, the friction between the graphite tip and the paper creates the marks. Without sufficient friction, the pencil would not be able to leave a mark on the surface.
The mineral graphite is soft enough to leave a mark on paper. We use graphite, which is a form of carbon, as pencil lead. And it works pretty darn well at leaving marks on paper.
The friction created when writing with a pencil is primarily kinetic friction. As the pencil moves across the paper, the tiny irregularities in the paper and pencil lead create resistance that enables the pencil to leave a mark.
The two physical properties of pencil lead are its hardness and its ability to leave a mark on paper. Hardness determines how dark or light the mark will be, while the marking ability is due to the graphite composition of the lead.
The answer depends on a variety of variables, but the simplest is that barring further action on the pencil mark (rubbing, wear, etc), it will last as long as the paper.
Friction is useful for a pencil when writing or drawing as it creates the necessary resistance between the pencil tip and the paper to leave a mark. This friction helps transfer the graphite or ink from the pencil onto the surface, allowing for clear and precise writing or drawing.
No, pencils do require friction to write. When a pencil is pressed against paper, the friction between the graphite tip and the paper surface causes the graphite to leave a mark. Without this friction, the pencil would not be able to write.
Yes, pencils need friction in order to write. The friction between the pencil lead and the surface of the paper allows the lead to leave a mark as it rubs off onto the paper. Without friction, the pencil lead would not be able to transfer onto the paper.
The mineral that is soft enough to leave a streak on paper is graphite. Graphite is a form of carbon and is commonly used in pencils due to its softness and ability to leave marks on paper.
I consider myself as a pencil because like a pencil, I believe in the power of expression and creativity. Just like a pencil leaves its mark on paper, I aim to leave a positive influence or impact on others. Additionally, a pencil can be used to correct mistakes and improve, which reflects my belief in constant growth and learning.
Friction of the paper allows the soft pencil to leave a trace of fine particles behind on the paper.