0
What else can I help you with?
The perimeter of a table is 30 feet It is twice as long as it is wide What is the length of the table?
Length of the table is 10 feet.
What side is length and what side is width of a table?
Conventionally length is the longer dimension.
A table has a width of 36 inches and a diagonal of 85 inches. What is the length of the table?
77 in
What is the standard convention table length?
6'x3'
What is the estimated length of a table?
The estimated length of a table can vary widely depending on its intended use. For example, a standard dining table typically ranges from 5 to 8 feet long, while a coffee table might be around 4 to 5 feet. For work or conference tables, lengths can vary from 6 to over 10 feet. Ultimately, the specific length will depend on the design and purpose of the table.
What is a rip cut and how is it performed in woodworking?
A rip cut is a type of cut made along the length of a piece of wood, parallel to its grain. It is typically performed using a table saw or a handheld circular saw with the blade set to the appropriate depth and guided along a straight edge to ensure a straight cut.
What dose Meters sticks end to end along the length of a large table?
your question doesn't make any sense
What is the thickness of marble table top?
Most stone table tops and benchtops are at least 20mm thick, but they will require support for the stone along the full length and width at this thickness.
Are table runners supposed to be longer than the table?
Yes, table runners are typically shorter than the table they are placed on. They are meant to run along the center of the table, leaving some space on either end for a balanced look. A general guideline is for the table runner to be about two-thirds the length of the table.
How is a mortgage amortization table created?
A mortgage amortization table is created by taking the principal and the interest rate percentage, along with the length term of the mortgage. The amortization table is to gain an estimate of what the buyer needs to pay and for how long.
The perimeter of a table is 30 feet It is twice as long as it is wide What is the length of the table?
Length of the table is 10 feet.
How many molecules of NaCl is in one grain of table salt?
One grain of table salt contains approximately 2.44 x 10^19 molecules of NaCl.
What is the standard coffee table length?
The standard coffee table length is actually one-half to two-thirds the length of the sofa it will rest before.
What is the best saw for ripping wood?
The best saw for ripping wood is a table saw. It is designed specifically for making long, straight cuts along the grain of the wood, making it ideal for ripping tasks.
What is a DIV layout?
Its used for tableless websites. So instead of <table><tr><td>, you would use <div> to separate areas along with a style sheet.
What do you feed chickens if grain is not available?
I lived on a small farm for a few years and we fed our chickens table scraps when their grain ran low.
What is rip cutting and how is it performed in woodworking?
Rip cutting is a woodworking technique used to cut wood along the grain. It is performed by using a table saw or a handheld circular saw with the blade set parallel to the wood grain. This technique is commonly used to create long, straight cuts in wood boards.
