Want this question answered?
Torque and horsepower are two separate ratings.
vtech is having 2 cams one for low end torque then switches to the other for high end torque vtech is having 2 cams one for low end torque then switches to the other for high end torque
Yes, torque can have a negative value in physics. Torque is vector energy. Torque is the vector analogue of Work involving force (F) and displacement (D) vectors and the angle (FD). For example Work W = -F.D= -|FD|cos(FD) and Toque T = FxD =|FD|sin(FD). Torque can be negative dependent on the sine(FD). Work and torque is an example of the quaternion nature of physics; for example Quaternion energy E = FD = -F.D + FxD, the real energy is called work F.D and the vector energy is called torque, FxD.
A 4 inch drill pipe torque is used for fishing in small casing.
no it is dependent
If it is a standard installation for the time, it will be held in on two sheer-headed bolts. These have to be drilled and extracted using an easy-out (basically a left-handed, tapered tap). Installation is the reverse of extraction but you need new sheer-headed bolts - they usually have socket heads above a tapered shank that break off when tightened to the correct torque.
Less than 0 !!!!Javilins had tapered roller bearings, this type of bearing is not torqued at all. They have an ideal endplay specification, most cars of this era it was about 0.007 of an inch.
When shifting into drive you torque the engine on its mounts. I would look for broken or missing engine to body ground straps. You can always add one as a test, run a strap of at keat 3/8" from a clean bolt on the engine or alternator to the body. If problem is fixed be happy.
Electromagnetic torque and load torque are different.Electromagnetic torque is the torque that is produced inside the machine which makes the machine rotate,while load torque is the torque that is applied externally with brake drum and and spring balance.Electromagnetic torque can be varied by varying the speed of the machine,but load torque is fixed.
Torque output of the engine at that speed.
The torque converter clutch is inside the torque converter.The torque converter clutch is inside the torque converter.
140lbs on your torque wrench
The first thing we have to know is--what torque? Is it Head bolt torque, rod bolt torque, main cap torque, water bolt torque, or something else? Please specify.
Torque is the cross product of radius and force .Torque is a twisting effect. Torque is the cross product of radius and force .Torque is a twisting effect.
A torque sensor, or torque meter, is a device that measures the torque on rotating systems, usually wheels. Torque, in this case, is the twisting force that causes rotation, such as that applied when you pedal a bicycle.
anywhere from 85 pounds torque to 90 pounds torque will work, but factory is 87 pounds torque. personnally, i set mine at 100 pounds torque
Torque is the cars power, horsepower is only the rate at which the torque is produced.