LC= Value of one main scale division Total number of divisions on vernier
150In the opinion of another contributor:In Roman numerals LC = 50 because LC = -50+100 = 50But in Roman numerals CL = 150 because CL = +100+50 = 150Answer LC is an incorrect way of writing 50, why would you write 50 less than 100 when you could simply write L (50)?Aditional input:The rule of subtraction isn't used, except between I's and X's. E.g, you wouldn't write IL for 49, rather this should be written as forty (XL) and nine (IX), or XLIX.Therefore LC doesn't make sense, or is 150.
It is: -L+C = L which is the equivalent of -50+100 = 50
The Flymo PC 400 blade will fit the LC 400 with fabrication.
To show the frontline as a series of arcs, and label the ends of the arc "LC."
LC= Value of one main scale division Total number of divisions on vernier
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
We need two readings. One is Main scale reading and the other is vernier scale reading. Main scale reading will be read on the main scale. We need an indicator to read it. Right? The marking ie zero of the vernier is that indicator. So the reading on the main scale which has been just crossed by zero of the vernier is taken as Main scale reading. Now to get VSR, we need vernier scale coincidence. How do we get this? Any one of the divisions of the vernier will be found coincided with some divisions marked on the main scale. We don't worry about that main scale division but we concentrate only on the vernier scale division. This is VSC This VSC is to be multiplied by least count. So VSC x LC gives the VSR Now MSR + VSR gives the accurate reading.
Least count of vernier caliper= 1 MSD - 1 VSD. Main scale usually would have 1 mm as the minimum division. Such 9 divisions, ie 9 mm would be divided into ten equal parts in the vernier. So VSD = 0.9 mm Hence the least count = 1 - 0.9 = 0.1 mm If the same is to be given in centimetre, then it will be 0.01 cm.
hey ! hi iam gonna tell you how to find the least count of a vernier scale. first of all lc is the least possible measurement made by an apparatus this stand as a symbol of its accuracy now coincide the 0 of main scale to that of vernier scale if n main scale divisions = m verneier scale divisons then 1 vsd = n/m msd then lc = 1msd - 1 vsd (if n>m) = 1 vsd - 1 msd (if n<m)
68
No, not all books have an LC call number. Books that are not part of the Library of Congress collection, such as self-published books or books from small publishers, may not have an LC call number. Additionally, digital books or e-books typically do not have LC call numbers.
The value of each main scale divisions is half a degree(30') . The number of vernier scale divisions is 30. 29 main scale divisions are divided into 30 vernier scale divisions (30 VSD = 29 MSD ) Therefore value of 1 VSD = 29/30 MSD. Least Count (L.C.) = 1MSD - 1VSD = 1MSD - 29/30 MSD = 1/30 MSD = 1/30 x 30' (L.C.) = 1' (1 minute)
There are a number of places where one can watch LC videos. These websites include Dailymotion, Vimeo and YouTube. Otherwise, one can purchase a DVD so they can watch LC.
LC stands for Lucent Connectors