No, a tablecloth that is 155 cm long will not adequately cover a table that is 1.6 m long. Since 1.6 m is equivalent to 160 cm, the tablecloth is 5 cm shorter than the length of the table. Therefore, it will leave a small portion of the table uncovered.
No.
If the table is more than 3m in its longest dimension, then no; for example if the table is 1m wide by 5.5m long then the tablecloth will not fit onto it and cover it (without being cut).If the table is more than 2m in its shortest dimension, then no; for example is the table is square, it will be approx 2.345m along each side and the tablecloth will not fit onto it and cover it (without being cut).However, if the longest dimension of the table is less than or equal to 3m and the shortest dimension is less than or equal to 2m, then it will fit since the area of the tablecloth is 2m x 3m = 6m2 and the table has a smaller area of 5.5m2.
For a 10-foot rectangular table, you typically want a tablecloth that extends beyond the edges for a polished look. A standard size would be approximately 120 inches (10 feet) long and 60-72 inches wide, allowing for a drop of about 6-12 inches on each side. If you prefer a more formal appearance with a longer drop, consider a tablecloth that is 144 inches long. Always check the specific dimensions of your table and desired drop length for the best fit.
A 60 x 84 tablecloth typically fits a table that measures approximately 36 to 48 inches wide and 60 to 72 inches long. The cloth will provide a drop of about 12 to 24 inches on each side, depending on the exact dimensions of the table. This size is ideal for rectangular tables and can also work on some oval tables of similar dimensions.
There are 9 sq. ft. in a sq. yard. So 8 times 2.5 = 20 sq. ft. Divide by 9 = 2.22. sq. yards. That is the area of the table's surface. If you are looking for a table cloth to cover the table with overhang, I would suggest material 48" wide (4 feet.) and 3 1/2 yards (10' 6" ) long.
Yes, a tablecloth that is 155 cm long will cover a table that is 1.6 m long. Since 1 meter is equal to 100 centimeters, the table is 160 cm long. Therefore, the tablecloth will fully cover the table with some extra length.
No.
Unfortunately not, 1.6 metres is 160 centimetres, so the tablecloth is 5cm short.
If the table is more than 3m in its longest dimension, then no; for example if the table is 1m wide by 5.5m long then the tablecloth will not fit onto it and cover it (without being cut).If the table is more than 2m in its shortest dimension, then no; for example is the table is square, it will be approx 2.345m along each side and the tablecloth will not fit onto it and cover it (without being cut).However, if the longest dimension of the table is less than or equal to 3m and the shortest dimension is less than or equal to 2m, then it will fit since the area of the tablecloth is 2m x 3m = 6m2 and the table has a smaller area of 5.5m2.
sew a bunch of table cloths together or get a really long cloth
A drop is seldom consistent around the entire table with a standard tablecloth, because there are so many different size tables and only a few standard tablecloth sizes. This is not a problem so long as the cloth does not look skimpy or lopsided...it should work just fine!
A 60 x 84 tablecloth typically fits a table that measures approximately 36 to 48 inches wide and 60 to 72 inches long. The cloth will provide a drop of about 12 to 24 inches on each side, depending on the exact dimensions of the table. This size is ideal for rectangular tables and can also work on some oval tables of similar dimensions.
2x3 is 6 square metres, so in theory it should, as long as the table doesn't have one length longer than 3 metres
The most durable and easiest to care for tablecloth material would be vinyl or oilcloth. Spills are easily cleaned and the durability guarantees a long lasting tablecloth for your everyday needs.
If you are making a rectangular 9 ft. tablecloth, you will probably need a little more than 9 ft. of fabric to allow for turning under and finishing your two ends. I would suggest 3 yards (9 ft.) plus another 6 in. to allow for turning under 1" and finishing your two ends with 2" hems.
92 and a 1/4 inch long 53 inches wide and 18inches freeboard. regular dynamo bar pool table with coin slots. i need a durable cover.
There are two solutions.First, just cut your round tablecloth out of a length of fabric, and throw away the waste corners.Second, make a number of triangles (6 to 10), long thin wedges each one sixth (tenth) of the circumference at the sort end, and the length of the wedge being the radius of your table. sew them together to make your circular tablecloth out of the wedges, and trim off the surplus.And all possible answers will need you to assume a particular width for the cloth.