0
What else can I help you with?
How much is 1 cm to a scale?
find a ruler bell end.
Why do you use cm scale for making furniture?
The mm scale is used for making furniture, not the cm scale. The cm scale is not precise enough for joints. The cm scale is adequate for marketing furniture because in most cases its positioning does not need to be that precise.
What is the scale of 2 meters to cm?
The scale 1 cm = 2 meters is a scale of 1: 200 (1/200th scale).
What is Volt.DIV on the oscilloscope?
this referrs to the scale of measurement across the y axis ; in this case being the amplitude of a signal measure. this details how many volts are set per 1 division; usually 1 cm height, hence setting the control dial to 1 volt per division, will set the scale at 1 volt per cm. setting the dial at 0.1 volt per division will set the scale at 0.1 volt per cm division.
What is the scale factor of 3 cm and 5 cm?
The scale factor between two lengths is found by dividing one length by the other. In this case, if we take the lengths of 3 cm and 5 cm, the scale factor can be calculated as 3 cm / 5 cm = 0.6. This means that 3 cm is 0.6 times the length of 5 cm. Conversely, the scale factor from 5 cm to 3 cm would be 5 cm / 3 cm, which equals approximately 1.67.
What is the scale factor of two figures with a perimeter of 50 Cm and 75 Cm?
There need not be any. There is no scale factor between a pentagon with a perimeter of 50 cm and a triangle with a perimeter of 75 cm. The shapes are totally different!The scale factor is 2 : 3.
If 1 cm on a map represents 25000 cm on the ground the scale of the map is?
The scale of the map can be expressed as a ratio or fraction. Since 1 cm on the map represents 25,000 cm on the ground, the scale is 1:25,000. This means that every 1 cm measured on the map corresponds to 25,000 cm in reality.
What the scale for 8.5 cm x 11 cm?
1: 2.34
What does 60 mm look like on a cm scale?
6 cm.
Jenna wants to make a park bench as part of her family's miniature railroad train display If the display is built to scale where 2 cm 1 ft and Jenna is modeling her bench after a bench with a le?
Jenna wants to make a park bench as part of her family's miniature railroad train display. If the display is built to scale where 2 cm = 1 ft, and Jenna is modeling her bench after a bench with a length of 6 ft, what will the length of Jenna's model be?
AThe height of a ball is 12 m A scale model is made of a hall The height of the scale model of the hal is 30 cm Express the scale of the model in the form 1n?
Convert m > cm 12m = 1200 cm 1200cm / 30 cm = 40 1:40
If I am photocopying a rectangle that is 8 cm x 10 cm what scale factor do I use if I wanted to become 16 cm x 20 cm?
To determine the scale factor for enlarging a rectangle from 8 cm x 10 cm to 16 cm x 20 cm, divide the dimensions of the larger rectangle by the dimensions of the smaller rectangle. For the width, 16 cm ÷ 8 cm = 2, and for the height, 20 cm ÷ 10 cm = 2. Therefore, the scale factor you would use is 2.
