0
A 1-meter deep inset bathtub measures a meter wide and two meters long inside how much extra weight would the floor need to support if the tub were filled with water to the brim?
Wiki User
∙ 16y ago
A one by one by two meter tub has a volume of 2 square meters or 70.63 cubic feet. Such a volume will contain 528.3 gallons of water. At 8.345 pounds per gallon, the water in the tub will weigh 4409 pounds.
Wiki User
∙ 16y ago
The volume of water the tub can hold is 1 meter deep by 1 meter wide by 2 meters long, which equals 2 cubic meters. 1 cubic meter of water weighs approximately 1000 kg, so the total weight of water in the tub would be 2000 kg. Therefore, the floor would need to support an additional 2000 kg of weight when the tub is filled with water.
Add your answer:
Earn +20 pts
What is the most reasonable unit of capacity for a bathtub?
The most reasonable unit of capacity for a bathtub is typically measured in gallons or liters. This measurement helps determine the amount of water the bathtub can hold when filled to the desired level.
Does a bathtub fillied with water hold about 15 pints or 15 gallon?
A bathtub filled with water typically holds about 30-50 gallons, depending on the size of the tub. It would not hold only 15 pints, as that is equivalent to less than a gallon of water.
How many liters are in a bath?
200 to 500,
What is a hall that is filled with columns called?
A hall filled with columns is commonly called a colonnade. Columns are often used in architecture to provide support for a roof or ceiling, as well as for decorative purposes.
How many cups of water can a full bathtub take?
The weight of the bath tub must be a given because of the variables of construction and materials. Measure the interior length, depth, and width to the nearest foot. Multiply these values together and then multiply by 7.48 gals/cuft.
What is the volume of a half filled bathtub?
It depends on what size bathtub you have.
Mass of a bathtub filled with water?
About 550 pounds.
Is a bathtub filled with water 200 L or 200 mL?
200 L
What is the most reasonable unit of capacity for a bathtub?
The most reasonable unit of capacity for a bathtub is typically measured in gallons or liters. This measurement helps determine the amount of water the bathtub can hold when filled to the desired level.
How did Archimedes get the idea for his world famous law?
in his bathtub Archimedes filled the bathtub up with water and put a gold bar and saw that that made the water go up:)
What is the depth of water in the bath?
The depth of water in a standard bathtub is usually around 14-15 inches when filled to a comfortable level. However, this measurement can vary depending on the size and shape of the bathtub.
How many cups of un cooked popcorn does it take to fill a normal sized bath tub?
672 cupsA standard bathtub holds 42 gallons when it is filled up to the overflow.16 cups = gallon672 cups = 42 gallons = one standard bathtub
What is mercury filled glass tube that measures air pressure?
This is called a barometer.barometerBarometer
Did Archimedes discover perimeter?
No. The answer to this multiple-choice question is that he discovered "displacement", famously seeing water spill out of his filled bathtub when he got into it. ("Eureka!")
What is the the name of the object a thin glass tubbed filled with liquid that measures temperature?
Thermometer
It has no top or bottom but it can hold flesh bones and blood?
A container such as a bathtub or pool can hold flesh, bones, and blood but has no top or bottom when filled with water and someone is in it.
How many liter does bath tub hold?
A typical bathtub can hold around 150-190 liters of water when filled to the top. However, this can vary depending on the size and shape of the tub.
