0
Add your answer:
Earn +20 pts
How long will it take a standard hose to fill 896 cubic feet with water?
The time it takes to fill a volume with water using a standard hose depends on the flow rate of the hose. Without knowing this flow rate, it is not possible to provide an accurate estimate of the time needed to fill 896 cubic feet.
How much water can flow through 5 8ths of an inch hose Diameter times 100?
To calculate the flow rate through a hose, we first need to find the cross-sectional area of the hose. The cross-sectional area of a 5/8-inch diameter hose is (5/16)^2 * π square inches. To convert this to square feet, divide by 144. Finally, multiply this area by the flow rate in feet per second (100) to get the flow rate in cubic feet per second.
How many gallon of gasoline is in a 20'length of 4 hose?
A 20' length of 4-inch hose can hold approximately 0.38 gallons of gasoline per foot. Therefore, 20 feet of this hose can hold around 7.6 gallons of gasoline.
What is The biggest hose in the world?
The largest hose is believed to be the Voring Plateau Deepwater Cross-Over in Norway, measuring almost 400 feet in height and stretching over a steep waterfall. This hose is used to transfer water from the river above to a power station below.
How many gallons of water is in a 2.5 inch fire hose fifty feet long?
A 2.5 inch fire hose has a capacity of approximately 60 gallons per 100 ft. Therefore, a 50 ft hose would hold around 30 gallons of water.
How much does it cost to replace all water hose on a 96 mercury villager?
When repairing a car, it is important to know the cost of the repair. A 1996 Mercury Villager it would cost between $20 and $60+ depending on part brand, shipping costs or labor costs.
How much water is in 100 feet 1.75 inch hose?
There need not be any water at all in the hose! The capacity of the hose is 1.67 cubic feet.
How many gallons of water in a 2.5 inch hose 100 feet long?
There need not be any water at all in the hose! The capacity of the hose is 3.41 cubic feet.
How much supply hose does NFPA recommend pumpers carry?
NFPA 1901, Standard for Automotive Fire Apparatus - Requires pumpers to carry: * 15 feet of large soft sleeve hose or 20 feet of hard suction hose * 1200 feet of 2 ½ inch or larger supply hose * 400 feet of 1 ½ , 1 ¾, or 2 inch attack hose
What is the volume of 50 feet of 2.5 inch hose?
50 feet of 2.5-inch diameter hose has a volume of: 1.7 cubic feet (12.72 liquid gallons)
How much does it cost to fix an radiator hose?
Usually a radiator hose is not repaired though replaced can cost minimal of a couple of dollars to a lot of dollars depending on the hose to be replaced
How much does an air hose reel cost?
Air hose reels are fairly inexpensive. They can be found online for as low as $15. A higher end air hose reel can cost up to around $100. The price will vary by the diameter of the hose and the psi of the hose.
How much does it cost to replace an emission hose on a Jeep Wrangler?
How much does it cost to replace a worn emission hose on a Jeep Wranger?
How much does the Foodsaver Food Storage system cost on QVC?
Normally, the Foodsaver Food Storage SmartSeal Vacuum system with accessory hose costs $154.00 on QVC. Its featured price at QVC is $139.98. Without the hoses, a basic model costs $119.99 on QVC.
How much water is in a 3 inch hose 25 feet long?
The capacity of a 25 ft hose with a diameter of 3 inches is 1.23 cubic feet. That is the maximum volume of water in the hose: there need not be any!
How much does it cost to repair a water pump bypass hose on Pontiac Montana 2001?
Cost me $110. $57 for the hose and $35 for the antifreeze.
How many gallons of water to fill a 2 inch fire hose?
A standard fire hose is 50 feet long. A hose this length with a 2-inch radius grants about 4.36 cubic feet. This volume holds 32 gallons of water.
