depending on the insulation type. Most 12 AWG wire will carry that current capacity either. Unless you are running it in the desert or some place extremely hot where derating becomes a factor.
Chat with our AI personalities
It is not recommended to run a 12 amp heater on 125 feet of 12-3 wire as it may cause voltage drop and overheating issues. It is recommended to use a larger wire gauge, such as 10-3 wire, to safely power the heater over that distance.
1 sq yard = 9 sq feet 125 sq yards = 125 x 9 sq feet =1125 sq feet
For a 125 amp sub panel located less than 200 feet away from a 200 amp panel, you would typically use a 2 AWG copper wire or 1/0 AWG aluminum wire to safely carry the current load. It's important to follow local electrical codes and regulations when selecting the wire size.
Yes, no problem at all going to a larger ampacity of wire. Larger size wire yes, smaller size wire no.
For a 160' run at 125 amps, you would need at least a 2-gauge wire to minimize voltage drop and ensure safety. It's always best to consult with a qualified electrician to confirm the appropriate wire gauge for your specific situation.
125 feet by 500 feet equates to 1.43 acres.