0
Yes, the rating of the fixture is the maximum size bulb that the fixture should take. The fixture is rated to dissipate a certain amount of heat that is generated by a bulb. By putting in a bigger bulb and thereby generating more heat than the fixture was designed for, could destroy the fixture. Some fires have been known to start this way.
What else can I help you with?
What happens if you put a 250 watt mercury bulb in a 175 watt fixture?
Using a higher wattage bulb than what the fixture is rated for can result in overheating, potentially causing damage to the fixture or even starting a fire. It is important to always match the wattage of the bulb to the rating of the fixture for safety.
Can i replace a 250-watt halogen bulb with a 3000-watt halogen bulb?
No. Only replace lamps in a fixture that the manufacturer of the fixture recommends. By installing larger than recommended lamps this could create a fire due to the increase of heat generated by the over size lamp.
Can a 250 watt heat bulb go into any lamp?
No, not all lamps are suitable for use with heat bulbs. Check the lamp's specifications to ensure it can handle the heat output of a 250-watt bulb and has proper ventilation to prevent overheating and potential fire hazards. It's recommended to use lamps specifically designed for heat bulbs to ensure safety.
Can you use 250 watt bulb in a 150 watt lamp?
It is not recommended to use a 250 watt bulb in a lamp designed for a maximum wattage of 150 watts. Doing so can potentially cause overheating, damage the lamp socket or wiring, and create a fire hazard. Always use the correct wattage bulb recommended for your lamp to ensure safety.
Can you use a 250 watt bulb with a 15 amp switch?
Yes, you can use a 250 watt bulb with a 15 amp switch. The switch is rated for up to 15 amps, which is more than enough to handle the power of a 250 watt bulb. Just make sure that the wiring and other components in the circuit can also handle the load.
How do you connect 250 watt bulb into a ballast?
If the 250 watt bulb is a HID or similar type the ballast comes complete with the fixture. The bulb socket is also part of the fixture and comes pre-wired to the socket. To connect the bulb to the fixture all that has to be done is just screw it into the fixture's socket.
What happens if you put a 250 watt mercury bulb in a 175 watt fixture?
Using a higher wattage bulb than what the fixture is rated for can result in overheating, potentially causing damage to the fixture or even starting a fire. It is important to always match the wattage of the bulb to the rating of the fixture for safety.
Can i replace a 250-watt halogen bulb with a 3000-watt halogen bulb?
No. Only replace lamps in a fixture that the manufacturer of the fixture recommends. By installing larger than recommended lamps this could create a fire due to the increase of heat generated by the over size lamp.
Can a 250 watt heat bulb go into any lamp?
No, not all lamps are suitable for use with heat bulbs. Check the lamp's specifications to ensure it can handle the heat output of a 250-watt bulb and has proper ventilation to prevent overheating and potential fire hazards. It's recommended to use lamps specifically designed for heat bulbs to ensure safety.
How hot does a 60 watt bulb get when it is turned on?
A 60 watt bulb can reach temperatures of around 200-250 degrees Fahrenheit when turned on.
Can you use 250 watt bulb in a 150 watt lamp?
It is not recommended to use a 250 watt bulb in a lamp designed for a maximum wattage of 150 watts. Doing so can potentially cause overheating, damage the lamp socket or wiring, and create a fire hazard. Always use the correct wattage bulb recommended for your lamp to ensure safety.
How Much Lumens in a 250 watt HPS Light Bulb?
A 250-watt HPS (High Pressure Sodium) bulb typically produces around 28,000 lumens at the initial phase of operation. However, this can decrease over time as the bulb ages.
Can a 250 watt lamp be used in a regular lamp?
Under two conditions it can. One the fixture that the lamp goes into has to be rated at 250 watts. This is highly unlikely in a home lighting fixture. The other is that the lamp has to be an incandescent lamp.
Can you use a 250 watt bulb with a 15 amp switch?
Yes, you can use a 250 watt bulb with a 15 amp switch. The switch is rated for up to 15 amps, which is more than enough to handle the power of a 250 watt bulb. Just make sure that the wiring and other components in the circuit can also handle the load.
Lumen output of a 250 watt high pressure sodium bulb?
A 250 watt high pressure sodium bulb typically has a lumen output of around 28,000 to 30,000 lumens.
What is the life span on these 250 watt bulb?
The lifespan of a 250 watt bulb can vary depending on the type of bulb (incandescent, LED, etc.) and its usage. Generally, incandescent bulbs have a lifespan of around 1,000 hours, while LED bulbs can last up to 25,000 hours or more. Regular maintenance and proper usage can also affect the longevity of the bulb.
Do you have to use a ballasts for a 250 watt metal halide?
Yes, the ballast is an intricate part of the fixture that the lamp screws into regardless of what size wattage the lamp is.
