Wiki User
β 11y agoNo. The bulb has to match the ballast wattage exactly. And you can't interchange different lamps (like metal halide) either. The ballast is specific to that wattage and lamp type. The bulb will either burn out quickly or just not work properly at all
Wiki User
β 11y agoWiki User
β 11y agoNo, the ballast must match the lamp wattage.
Wiki User
β 14y agoNo, it always need a ballast to go with the lamp.
Wiki User
β 14y agoNo, you can not use a metal halide lamp without a ballast.
Wiki User
β 13y agoNo, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
To power a sodium vapor lamp, you typically need a ballast specifically designed for high-pressure sodium lamps. This ballast helps regulate the electrical current to the lamp, which is crucial for proper operation and longevity of the bulb. It is important to use the correct ballast to avoid damaging the lamp or creating a safety hazard.
To ignite a 400W electronic metal halide or high pressure sodium bulb, you need to ensure that the power supply is connected and turned on. These bulbs require a ballast to regulate the electrical current, so make sure the ballast is functioning properly. Once everything is set up, simply turn on the power switch, and the bulb should ignite.
For a 430 watt high pressure sodium bulb, you would typically need a ballast that is rated for 400-430 watts to properly operate the bulb. It is important to match the wattage of the bulb with the wattage rating of the ballast to ensure optimal performance and lifespan of the bulb.
Yes, a ballast is required for HPS (high-pressure sodium) lights. The ballast helps regulate the electrical current and provides the initial high voltage needed to start the lamp. Without a ballast, the HPS light would not function properly.
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
No, you can not use a 150 watt high pressure sodium bulb with a 70 watt ballast.
To ignite a 400W electronic metal halide or high pressure sodium bulb, you need to ensure that the power supply is connected and turned on. These bulbs require a ballast to regulate the electrical current, so make sure the ballast is functioning properly. Once everything is set up, simply turn on the power switch, and the bulb should ignite.
To power a sodium vapor lamp, you typically need a ballast specifically designed for high-pressure sodium lamps. This ballast helps regulate the electrical current to the lamp, which is crucial for proper operation and longevity of the bulb. It is important to use the correct ballast to avoid damaging the lamp or creating a safety hazard.
For a 430 watt high pressure sodium bulb, you would typically need a ballast that is rated for 400-430 watts to properly operate the bulb. It is important to match the wattage of the bulb with the wattage rating of the ballast to ensure optimal performance and lifespan of the bulb.
The 400W high pressure Sodium bulb contains a silver lining inside the frame to give better reflection of light. However, no silver is found inside the bulb.
Yes, a ballast is required for HPS (high-pressure sodium) lights. The ballast helps regulate the electrical current and provides the initial high voltage needed to start the lamp. Without a ballast, the HPS light would not function properly.
I actually have a 400w hps ballast and I can also use my 400w metal halide bulb in it with no problem. So what your saying is they do, but they dont? the answer is, they dont. You can get universal bulbs hps to plug into a mh ballast they have a miniturized igniter inside the bulb. As I understand it, a 400W metal halide bulb can be used with a 400W hps ballast, but not the converse. A MH bulb has the igniter in the bulb, and the HPS has it in the ballast--which pretty much goes along with your comment above. Apparently the double presence of the igniter in the HPS setup is OK.you can run metal halide in same wattage's but not hps in metal halide systems.you can run such as (same wattage's)250 watt metal halide-400 watt halide ect in hps systems but not hps bulbs in halide systems. they make conversion bulbs to run halide in hps as well and vice versa.
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
A high pressure sodium bulb works by creating light through the process of electrical current passing through a mixture of gases and a sodium vapor inside the bulb. When the current passes through the sodium vapor, it produces a glowing plasma that generates the characteristic yellow-orange light emitted by high pressure sodium bulbs.
The High pressure sodium grow lights kits usually contain a ballast, a reflector, a lamp, a power cord and plug. But, the items may vary by the brands of kits you purchase.
Signs that a high-pressure sodium bulb may be going bad include a decrease in light output, flickering or inconsistent illumination, or a change in color temperature (turning more pink or purple). If the bulb fails to turn on or requires frequent replacement, it may be time for a new one.
A 250 watt high pressure sodium bulb typically has a lumen output of around 28,000 to 30,000 lumens.