0
RPM Revs Per Minute (how many times it spins round) is all to do with the cogs or gears linking the motor to the end shaft. The smaller the gear the greater rpm the bigger the gear the slower rpm. Someone although did tell me that 3000 rpm is 80 mph but that is false, it all depends on the gears.
You don't. RPM is revolutions per minute and not meters per minute, and not any distance per minute. A revolution per minute (rpm) is one full circle per minute ( 2 pi radians per minute or 360 degrees per minute )
Of course you can. RPM means the number of revolutions per minute. If you know the radius of the wheel than it's circumference is 2*Pi*r. If you know the diameter, the circumference is Pi*d. Imagine a tape measure along the rolling surface of the wheel. As the wheel turns, that tape is placed down on the street, one circumference worth of length per full rotation.
For example. if the diameter is 1 m (same as the radius being 1/2 meter) then per revolution you cover 3.14159 meters. If you were to go at 1000 rpm that translates into 3141.59 meters or 3.1 km per minute leaving you with a trailblazing 180 km/h. Catch me if you can.........
To convert RPM (revolutions per minute) to meters per minute, you need to know the circumference of the rotating object. Use the formula: meters per minute = RPM * circumference of the object. The circumference can be calculated as 2 * Ο * radius (for circular objects).
Well, honey, to convert RPM (revolutions per minute) to meters per minute, you need to know the circumference of the rotating object. Just multiply the RPM by the circumference in meters to get the speed in meters per minute. It's as simple as that, darling.
To convert RPM (revolutions per minute) into meters per minute, you need to know the circumference of the rotating object. The formula to convert RPM to meters per minute is: meters per minute = RPM x circumference. For example, if you have a rotating wheel with a circumference of 2 meters, and it is spinning at 60 RPM, the speed in meters per minute would be 60 x 2 = 120 meters per minute.
Well, isn't that a lovely question! To convert RPM (Revolutions Per Minute) into meters per minute, you first need to know the circumference of the circle or object. Then, you multiply the RPM by the circumference to get the distance traveled in one minute. It's just a matter of remembering a simple formula and applying it gently, like adding a happy little tree to a painting.
Add your answer:
Earn +20 pts
How do you convert rpm to meter per second?
To convert revolutions per minute (rpm) to meters per second, you need to consider the circumference of the rotating object. First, calculate the distance traveled in one revolution by multiplying the circumference of the object by the number of revolutions per minute. Then, convert the result to meters per second by dividing by 60 (to convert minutes to seconds). The formula is: speed (m/s) = (rpm * 2Οr) / 60, where r is the radius of the rotating object.
17240 miles per hour equals how many meters per minute?
To convert 17240 miles per hour to meters per minute, first convert miles to meters by multiplying by 1609.34 (conversion factor). Then, convert hours to minutes by multiplying by 60. Thus, 17240 miles per hour is approximately equal to 7742.4 meters per minute.
How do you convert from millimeter per minute to meter per hour?
Millimeters per minute x 0.06 = meters per hour
What is 500 yards per hour in meters per minute?
500 yards per hour is approximately equivalent to 228.6 meters per hour. To convert this to meters per minute, you would divide by 60 (as there are 60 minutes in an hour), resulting in approximately 3.81 meters per minute.
If a car is going 27 miles per hour how many meters will it travel in a minute?
To convert miles per hour to meters per minute, first convert 27 miles per hour to meters per hour by multiplying by 1609.34 (1 mile = 1609.34 meters). Then divide this value by 60 to get meters per minute. Therefore, a car going 27 miles per hour will travel approximately 24.14 meters in a minute.
How do you convert rpm to meter per second?
To convert revolutions per minute (rpm) to meters per second, you need to consider the circumference of the rotating object. First, calculate the distance traveled in one revolution by multiplying the circumference of the object by the number of revolutions per minute. Then, convert the result to meters per second by dividing by 60 (to convert minutes to seconds). The formula is: speed (m/s) = (rpm * 2Οr) / 60, where r is the radius of the rotating object.
How do you convert meters per minute to feet per minute?
Multiply meters per minute by 3.28 to get feet per minute.
Convert 12.5kms to meters per minute?
12.5 km per second is 750,000 meters per minute.
How to convert 1.1264 meters per second to meters per minute?
To get meters per minute, you'd multiply meters per second times the number of seconds in a minute which is 60.
Convert meters per minute to yards per minute?
Multiply meters by 1.0936 (rounded) to get yards.
How do you convert centimeters per second to meters per minute?
Centimeters per second x 0.6 = meters per minute
17240 miles per hour equals how many meters per minute?
To convert 17240 miles per hour to meters per minute, first convert miles to meters by multiplying by 1609.34 (conversion factor). Then, convert hours to minutes by multiplying by 60. Thus, 17240 miles per hour is approximately equal to 7742.4 meters per minute.
How do you convert revolution per minute to revolution per second?
Divide the RPM by 60.
How do you convert 120 kilometer per hour to meters per minute?
Conversion: km per hour x 16.67 = meters per minute
How do you convert cubic meters per second to cubic meters per minute?
Multiply by 60.
How do you convert gallons per minute to cubic meters per hour?
Use this formula: gallons per minute x 0.227 = cubic meters per hour
How fast is mach 0.8 or 272.23 meters per second in RPM?
To convert speed from meters per second (m/s) to revolutions per minute (RPM), you need to know the circumference of the rotating object. Without that information, it is not possible to directly convert mach 0.8 or 272.23 m/s to RPM. RPM is a measure of rotational speed, whereas mach is a unit of relative velocity to the speed of sound.
