0
Try Google searching a Home Depot video, that's what I'm going to try ..
RE : http://www.ehow.com/how_1000619_install-recessed-lighting.html look on the right hand side there's videos etc
What else can I help you with?
What color is the ground wire to trailer lights?
The ground wire for trailer lights is typically white.
What size wire should be used to wire a shower up?
Not enough information. Lights? Pumps?
Where can you find instructions to correctly install pot lights?
Try this site! I would also like to know how to install pot lights in the kitchen of a two story home..How do you get the wires past the studs in the ceiling to the other lights ? thanks...E First figure out where the joist spaces are. Get a stud finder and mark them out for better reference. Plan out where you want your pot lights to sit and cut out your holes. I use an appropriately sized hole saw. If you need to go through the joists you will need a drill and a drill bit that will make a hole big enough to get your wire through. If your pot lights are separated by multiple joists you will have to make holes in each joist space between them in the drywall to gain access. SAVE YOUR CUTOUTS! It will make patching the drywall a lot easier once you're finished.
What is the name given to the wire inside a light globe?
The wire that lights up inside the globe is the filament.
1991 ford e150 tail lights are not getting power?
check the fuse, if it is not blown, your tail lights may be missing ground, locate the ground wire on your tail light socket, then get a wire and a metal thumb tack, push the thumb tack thru the ground wire and splice the extra wire and wrap the bare wire around the thumb tack, turn your tail lights on and touch the bare metal of your van and see if it lights up, if it does lights up, just splice it and reconnect to the new ground source, hope this help you out :-)
How do you wire 4 pot lights so that if one burns out the others remain on?
Wire them in parallel. These are not Christmas tree lights. From the switch, all black wires together. All white neutrals together.
How do you wire license plate lights on a gas scooter?
to wire the license plate lights you must have lights and wire them to the scooter.
What is the 3 wire humbucker wiring diagram for connecting a humbucker pickup to a guitar circuit?
The 3 wire humbucker wiring diagram involves connecting the pickup's hot wire to the volume pot, the ground wire to the back of the pot, and the bare wire to the back of the pot or to the guitar's ground.
How do you wire brake lights for Honda cbr 1000?
how do i wire my brake lights on my Honda 1000
What color is the ground wire to trailer lights?
The ground wire for trailer lights is typically white.
Parking lights go on when brakes are apply and dashboard lights up?
short in the wire or they are all on one wire
How to wire multiple lights to one switch?
To wire multiple lights to one switch, you can connect the lights in parallel by running a cable from the switch to each light fixture. Make sure to connect the hot wire from the switch to the hot wire of each light, and the neutral wire from the switch to the neutral wire of each light. This will allow you to control all the lights with a single switch.
What is a clay cut off wire?
A thin strand of wire used to cut a clay pot off of the potting wheel after it is shaped. You pull it under the pot and it cuts it loose.
What is the yellow wire with a black stripe for 2000 Mitsubishi galant for panel lights?
where does the yellow wire with a black stripe on it connect for dimmer lights,panel lights,and gear shift lights,for a 2000 Mitsubishi galant
How can I securely hang outdoor lights using wire?
To securely hang outdoor lights using wire, first ensure the wire is strong enough to support the weight of the lights. Use hooks or eye screws to attach the wire to a sturdy structure, such as a wall or pole. Make sure to tighten the wire securely and evenly distribute the weight of the lights along the wire to prevent sagging or breakage. Additionally, consider using clips or fasteners to keep the lights in place and prevent them from swaying in the wind.
How do you wire a Super Beetle for towing?
wire into the tail lights at the back of the car
What are the differences between pot lights and can lights, and which type of lighting would be more suitable for my space?
Pot lights and can lights are actually the same thing - they both refer to recessed lighting fixtures that are installed into the ceiling. These lights are suitable for spaces where you want a clean, modern look without bulky fixtures. They provide a sleek and unobtrusive lighting option that can be used for general illumination or highlighting specific areas. The choice between pot lights and can lights would depend on your personal preference and the design aesthetic you are trying to achieve in your space.
