0
Still curious? Ask our experts.
Chat with our AI personalities
Fran
Vivi
MaxineTo calculate the number of receptacles on a 20 amp circuit with a 120V supply, you need to consider the total circuit capacity. A 20 amp circuit can typically support around 10 receptacles. However, always consult local building codes and regulations to ensure compliance and safety.
Add your answer:
Earn +20 pts
Can a 20 amp circuit breaker operate two 15 amp receptacle?
It is perfectly acceptable to have (2) 120 volt 15 amp receptacles operated from a 120 volt 20 amp circuit breaker (as a general rule of thumb 11 receptacles are acceptable on a 20 amp circuit). The 15 amp rating of the receptacle is the maximum allowed amperage that should be hooked up to the receptacle at any one time. So in this case the limiting factor is the amount of current being drawn across both receptacles simultaneously should not exceed the 20 amp rating of the circuit breaker. In the United States the NEC code allows the use of a 20 amp circuit breaker to feed a branch circuit consisting of 15 amp receptacles. Generally you would not exceed 11 receptacles though as you will assume an average load of 1.5 amps per receptacle and trying to maintain about 80% max load.
How many 20 amp ground fault interrupter circuit breakers are used to power the lights and receptacles for the medium shelter?
Two 20 amp ground fault interrupter circuit breakers are used to power the lights and receptacles for the medium shelter.
Can you control 10 outlets with one 20 amp GFCI outlet on one 20 amp circuit?
If each outlet draws less than 2 amps, then you could control 10 outlets with a 20 amp GFCI outlet on a 20 amp circuit. However, it's worth consulting an electrician to ensure the load calculations are accurate and the wiring is safe for the intended use.
How many watts can a 20 amp breaker handle per hour?
A 20 amp breaker can handle up to 2400 watts per hour (20 amps x 120 volts = 2400 watts).
How many watts can you run in 20 amp?
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
