0
Add your answer:
Earn +20 pts
How many amps does a two-bulb 32 watt 48-inch fluorescent light draw?
Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.
How many amps does a led light draw?
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
How many amps would a 150 watt bulb draw in a 120v circuit?
1 amp
How many amps does a 65 watt light bulb have at 120 volts?
To calculate the amperage, you can use the formula: Amps = Watts/Volts. For a 65-watt light bulb at 120 volts, the amperage would be 0.54 amps.
How many amps in a 50 watt 12v light?
To calculate the amperage, use the formula: Amps = Watts / Volts. In this case, 50 watts / 12 volts = 4.17 amps. So, a 50 watt 12V light will draw approximately 4.17 amps of current.
How many amps does a two-bulb 32 watt 48-inch fluorescent light draw?
Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.
How many amps does a led light draw?
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
How many amps will a 60 watt bulb draw from 120 volts?
Watts = Volts x Amps x Power Factor. An incandescent light bulb is a resistive load so PF = 1. ANSWER: = 1/2 Amp
How many amps does a 120 volt AC 8 watt led bulb draw?
It is drawing .06 amps.
How many amps would a 150 watt bulb draw in a 120v circuit?
1 amp
How many amps does a 65 watt light bulb have at 120 volts?
To calculate the amperage, you can use the formula: Amps = Watts/Volts. For a 65-watt light bulb at 120 volts, the amperage would be 0.54 amps.
How many amps does a microwave draw?
1100 watts or about ten amps then another 3 to 4 amps for turn table light and fan
How many amps to light a 60 watt light bulb?
A 60 watt light bulb typically draws 0.5 amps from a 120-volt power source. This is calculated by dividing the wattage (60 watts) by the voltage (120 volts).
How many amps are required for 100W light bulb operate on 110 volts?
amps equals watts divided by volts.
How many amps in a low voltage light bulb?
Look on the light bulb for the voltage and the power in watts. Then divide the watts by the voltage and that gives the amps. Some CFL bulbs also state the current as well as the voltage and power, which is because they can have a poor power factor.
How many amps does a can light use?
The answer depends entirely on the wattage of bulb used! You can find the amperage of your light by using the Power Law which states that amperage = wattage divided by voltage. Thus a 60 watt bulb on a 120 volt system would draw .5 or 1/2 an amp.
How many amperes does a standard 60 watt light bulb use?
Watts = Volts X Amps. Amps=Watt / Volts. So, with a 240V mains, a 60W bulb draws 0.25amps. On a 12 system (car/auto) a 60W bulb draws 5 amps. On a 110V mains, a 60W bulb draws .55 Amps.
