It depends on the size and type of the motor being started.
Chat with our AI personalities
A typical starter motor draws around 50 to 150 amps while cranking an engine. If the current draw is significantly higher or lower, it may indicate a problem with the starter motor or the electrical system.
100 amps
It depends on the size, how many beverages it can cool at one time. The power (watts) and voltage should be on a plate on the back of the cooler, so divide the watts by the volts to find the amps.
A deep freezer can draw between 6 to 8 times its running amps on start-up, depending on the model and size of the freezer. For example, if a freezer runs at 6 amps, it could draw between 36 to 48 amps when starting up.
Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.
To calculate the amps for a jump starter with 500 watts, you can use the formula: Amps = Watts / Volts. If assuming a standard 12-volt car battery, the calculation would be 500 watts / 12 volts = 41.67 amps.