Wiki User
∙ 14y agoThe questioner may be measuring in inches and, if so, the "outside" or "gross" volume of the case is: (65.6 x 29.6 x 30.8) / (12 x 12 x 12) = 34.61 cubic feet.
However that figure is much bigger than the inside "net" or "actual food storage" volume which will depend on several things we don't know:
The only ways to find out the actual answer to this question are to:
Wiki User
∙ 12y agoTo find the cubic feet of the refrigerator, you would multiply the height, width, and depth in feet (65/12, 33/12, 29/12) to get the volume in cubic feet. So, the refrigerator would be approximately 25.8 cubic feet.
Wiki User
∙ 10y agoI suspect that those are the dimensions you measured on the outside of the
refrigerator, whereas the "cubic feet" specification of the appliance refers to
the cooled space inside.
Those measurements define 39.5 cubic feet of space, and I'm SURE that you
don't have a "39-cubic foot" refrigerator.
Wiki User
∙ 9y agoYour are missing a measurement to make the determination. With two measurements, you can only get the number of square inches it will take against a wall. You will need a third measurement, depth to find the cubic inches. Then you can divide by 1728 (12x12x12) to get the cubic feet.
Wiki User
∙ 14y ago1
foot = 12 inch
Answer = 65 x 33 x 29 / (12 x 12 x 12) = 35.9983 cubic feet
The refrigerator is 36 cubic feet.
Jean Lanahan
Wiki User
∙ 14y agoAssuming your dimensions given are in inches, then the volume of your refrigerator is about 32 cubic feet.
Wiki User
∙ 10y agoA refrigerator that is 64 inches high, 27 inches deep and 30 inches wide has a volume of 30 cubic feet.
Wiki User
∙ 9y agoA volume involve 3 dimensions to be calculate.
Wiki User
∙ 8y ago62" x 28" x 27" = 27.125 cubic feet
Wiki User
∙ 15y ago3780ft^3
The volume of a refrigerator is typically measured in cubic feet. To convert 106.9557682 Kenmore refrigerator to cubic feet, you would divide by 1728 (since 1 cubic foot is equal to 1728 cubic inches). This conversion will give you the refrigerator's volume in cubic feet.
To determine the cubic feet space of a refrigerator, measure the height, width, and depth of the interior space in feet. Then, multiply these three dimensions together to calculate the total cubic feet capacity of the refrigerator. For example, if the dimensions are 3 feet high, 2 feet wide, and 2 feet deep, the cubic feet space would be 12 cubic feet (3 x 2 x 2).
To calculate the cubic feet of the refrigerator, you multiply the height by the width by the depth. For your measurements, it would be 37 x 31 x 25 = 28,925 cubic inches. To convert this to cubic feet, divide by 1,728 (since there are 1,728 cubic inches in a cubic foot), which gives approximately 16.73 cubic feet.
To find the number of square feet covered by 373 cubic feet at a depth of 1 inch, you would first convert cubic feet to square feet. Since the depth is 1 inch, and there are 12 inches in a foot, 1 cubic foot would cover 12 square feet at a depth of 1 inch. Therefore, 373 cubic feet would cover 373 x 12 = 4476 square feet at a depth of 1 inch.
There are 27 cubic feet in 4800 cubic inches. This conversion is based on the fact that 1 cubic foot is equal to 1728 cubic inches. Therefore, 4800 cubic inches equals 2.78 cubic feet.
= (65/12) x (35/12) x (350/12) cubic feet
66 in * 33 in * 31 in = 39.1 cubic ft approx. However, refrigerator volumes are usually the usable volumes.
The volume is 36*68*31 = 75,888 cubic inches = 75,888 / (12*12*12) = 43.91667 cubic feet.
26.65 cu .ft.
The refrigerator is (68/12)' x (30/12)' x (30/12) ft = 35.42 cubic feet. However, the quoted capacity will be the internal volume, not the outside.
36 x 68 x 31 = 75888
Volume is 29 x 33 x 30 = 28710 cubic inches 1 cubic foot = 12 x 12 x 12 = 1728 cubic inches So 28710 cubic inches = 28710/1728 = 16.614 cubic feet
The answer depends on how wide and deep it is!
A hole 40 inches deep by 12 inches wide has a volume of: 2.62 cubic feet.
1.963 cubic feet
35 cubic feet
24 cubic feet = 0.89 cubic yards