Wiki User
∙ 13y ago37 x 31 x 25 inches equals 28675 cubic inches, which is 16.59 cubic feet
Wiki User
∙ 13y agoTo calculate the cubic feet of the refrigerator, you multiply the height by the width by the depth. For your measurements, it would be 37 x 31 x 25 = 28,925 cubic inches. To convert this to cubic feet, divide by 1,728 (since there are 1,728 cubic inches in a cubic foot), which gives approximately 16.73 cubic feet.
Cubic meters are the best unit to measure the capacity of a shark tank because volume measurements like cubic meters can accurately represent the three-dimensional space inside the tank. Square meters measure area, not volume, and would not provide an accurate representation of the tank's capacity.
1 gallon = 231 cubic inches1 cubic foot = 1,728 cubic inches = 7.48052 gallons (rounded)2,722.5 cubic feet = 4,704,480 cubic inches = 20,365.7 gallons (rounded)whether there's anything in those cubic feet or not. Even if they're empty.
Those measurements are forms of spatial measurements.
Those are all units of volume. 1 cubic meter = 1000 liters; 1 liter = 1000 milliliters; cubic centimeter is an alternative name for milliliter.
To find the cubic feet of the refrigerator, you would multiply the height, width, and depth in feet (65/12, 33/12, 29/12) to get the volume in cubic feet. So, the refrigerator would be approximately 25.8 cubic feet.
Can't really tell by those measurements because freezer sizes differ but....If you look inside your refrigerator there should be a sticker or plate that lists the size of your unit.
Those are unrelated measurements; you can't convert one to the other.
you need the other measurements of depth and height. multiply them all together and then divide that number by twelve. Answer #2 If those measurements are taken in inches, you need to divide the cubic inches by 1,728 to get cubic feet.
Those measurements describe a volume of 40.93 cubic feet. But that's the total exterior volume of the appliance ... the amount of volume it fills in your kitchen. The "cubic feet" specification in the advertisement refers to the volume of the food-storage compartment inside. That'll be much less.
Cubic meters are the best unit to measure the capacity of a shark tank because volume measurements like cubic meters can accurately represent the three-dimensional space inside the tank. Square meters measure area, not volume, and would not provide an accurate representation of the tank's capacity.
That is not known. Few measurements have been taken from inside a tornado and few if any of those included temperature.
"CZ" inside a ring usually stands for "Cubic Zirconia," which is a synthetic gemstone that resembles a diamond. Rings with CZ stones are often more affordable than those with real diamonds.
Yes. There are much smaller measurements. 1 cc is a cubic centimeter; 1 cubic millimeter is 1000 times less volume. What is small to someone who works with food may be quite large for those who work with molecules
Essentially, you need three and a third cubic yards of concrete to replace that quantity to those measurements - so if the cost of a cubic yard of concrete is 30, multiply it by 3.333 and you get 100
Assuming those are the length measurements of a cuboid: volume = 10 units × 4 units × 20 units = 800 cubic units.
If it happens to be a hollow rectangular container with those dimensions, then it can accommodate 11,880 cubic feet, or 440 cubic yards, or 8,845.7 gallons of cargo inside.
Nobody here can answer this for you because we don't know what the measurements of your classmates are.