0
There is no equivalence.
A kilogram is a measure of mass. A cubic metre is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.
Some people still believe that there is a conversion in relation to pure water but that is only approximately true. Until 1964 (nearly 50 year ago!) a litre was defined as the volume of one kilogram of pure water at 4 degrees Celsius and at a pressure of 760 millimetres of Mercury. With that definition a conversion would have been valid - but only for pure water and only under those conditions. In any case that definition of a litre was abandoned in favour of 1 litre =1000 cubic centimetres.
In fact the density of pure water, at 4 deg C and 760 ml of mercury is 999.9720 kg/metre3 and at 20 deg C is 998.2071 kg/m3.
The answer, therefore, is APPROXIMATELY 50 m3 but only approximately so.
The conversion of mass (kilograms) to volume (cubic meters) depends on the density of the substance in question. To convert 50 kilograms to cubic meters, you would need to know the density of the material being measured. You can use the formula: volume = mass / density.
Add your answer:
Earn +20 pts
How many bags of sand in 1 cubic meter?
It depends on the weight of the sand, but on average, a 50 lb bag of sand equals approximately 0.0227 cubic meters. So, roughly there would be around 44 bags in 1 cubic meter of sand.
How many liters of chlorine in 50 cubic meters of water at 50 parts per million?
To calculate the amount of chlorine in 50 cubic meters of water at 50 parts per million, first convert cubic meters to liters (1 cubic meter = 1000 liters). Then, use the concentration of 50 parts per million (ppm) to find the amount of chlorine. This would result in 50 liters of chlorine in 50 cubic meters of water at 50 ppm.
For 50 lbs how many kilograms?
To convert 50 lbs to kilograms, you would multiply the number of pounds by 0.453592. Therefore, 50 lbs is approximately 22.68 kilograms.
50 ibs equal to how many kg?
50 pounds is equal to 22.68 kilograms.
50 liters is how many cubic feet?
50 L = 1,765 733 cubic foot 50 liters is 1.766 cubic feet
How many liters in 50 cubic meters?
Each cubic meter has 1000 liters.
What is the calorific value of natural gas in kilo joules by kilograms?
The calorific value of natural gas is typically around 45-50 megajoules per cubic meter (MJ/m³), which is equivalent to 45,000-50,000 kilojoules per cubic meter (kJ/m³). In terms of kilograms, the calorific value of natural gas is approximately 50-55 megajoules per kilogram (MJ/kg) or 50,000-55,000 kilojoules per kilogram (kJ/kg).
50 meter cube is equivalent to how many liters?
(50 metres)3 x (1,000 litres per cubic metre) = 125,000,000 litres
What is 160cubic meters x 50 cubic meters x 1 cubic meter?
8000 m9
How many cubic meters to cover 50 square meters x200mm thick?
(200 mm) / (1,000 mm per meter) = 0.2 meterVolume = (50 meters2) x (0.2 meter) = 10meters3
How many punds is 50 kilograms?
50 kilograms is approximately 110 pounds.
If you spread 20MM of gravel over 2860M2 area how many cubic meters will you need?
1 cubic meter of grave contains 50 square meters at 20mm depth (1000mm / 20mm = 50). 2860 / 50 = 57.2 So you need 57.2 cubic meters of gravel.
How do you calculate 50 cement bag to cubic meter?
A 50 kg cement bag will hold about 1.3 cubic feet of dry cement powder.
How many bags of sand in 1 cubic meter?
It depends on the weight of the sand, but on average, a 50 lb bag of sand equals approximately 0.0227 cubic meters. So, roughly there would be around 44 bags in 1 cubic meter of sand.
How many kilograms are there in 50 tons?
here are 50,000 kilograms in 50 tons
How many cubic inches in 50 cubic feet?
50 cubic feet = 50 * 12 * 12 * 12 cubic inches = 86400 cubic inches
How many meters in 50 sq meter?
You don't convert between meters, square meters, and cubic meters. Each of them is incompatible with the others.
