There are NO watts in 600 Volts. Voltage represents a potential to do something. Watts is a measure of power. They are related as follows:
Watts = Volts x Amps x Power Factor
Volts is potential, amps represents current flow from the potential and the Power Factor represents how the current and voltage waveforms are in synchronization or not. Therefore, to know watts you need to know something other than just the voltage. The good news is that the Power Factor is one for a resistive load like a light bulb.
I think you mean 600 MV.A (megavolt amperes). A lower-case 'm' stands for 'milli' -and that makes a heck of a difference to the rating of your transformer! Furthermore, the symbols for volt and ampere are upper case, not lower case.
The answer is that there is no answer. The MV.A rating tells us nothing about its voltage ratings. That information you will have to find from the transformer's nameplate data.
Incidentally, there are two rated voltages: a primary and a secondary.
To calculate the amperage, use the formula: Amps = Watts / Volts. In this case, 0.8 megawatts is equal to 800,000 watts. So, Amps = 800,000 watts / 600 volts, which equals approximately 1333.33 amps.
A transformer does not use, it transforms voltage from one value to another. The output amperage is governed by the connected load. If the load wattage is higher than the wattage rating of the transformer then either the primary or secondary fuse will blow or the transformer will burn up if the fusing is of the wrong sizing. The maximum primary amperage can be found by using the following equation, Amps = Watts/Volts, A = W/E = 600/120 = 5 amps. The same equation is used for the calculating the maximum secondary amperage, A = W/E = 600/12 = 50 amps.
If you are using a 120V power supply, a 600 watt floodlight will draw 5 amps of current (600 watts รท 120 volts = 5 amps). Remember to always check the specific electrical requirements of your floodlight to ensure the correct amperage.
To find the amperage, use the formula: Amps = Watts / Volts. In this case, 600 Watts / 115 Volts = approximately 5.22 Amps. So, the microwave oven requires approximately 5.22 Amps of current.
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
To calculate the amperage, use the formula: Amps = Watts / Volts. In this case, 0.8 megawatts is equal to 800,000 watts. So, Amps = 800,000 watts / 600 volts, which equals approximately 1333.33 amps.
600 This depends on the voltage Voltage x Amps = Watts ex. At 120 volts 5 amps WILL BE 600 watts But at 110 Volts (Some house voltage), it will be 550 watts And at 277 Volt (commercial-Industrial Voltage), it would be 1385 Watts If you know Watts (Like a 75w Incandescent Lamp) and the Voltage: Watts / Volts = Amps So 75w / 120v = 0.625a The last would be Watts / Amps = Volts 600w / 5a = 120v
volts times amps = watts
A transformer does not use, it transforms voltage from one value to another. The output amperage is governed by the connected load. If the load wattage is higher than the wattage rating of the transformer then either the primary or secondary fuse will blow or the transformer will burn up if the fusing is of the wrong sizing. The maximum primary amperage can be found by using the following equation, Amps = Watts/Volts, A = W/E = 600/120 = 5 amps. The same equation is used for the calculating the maximum secondary amperage, A = W/E = 600/12 = 50 amps.
Watts and Volts are two distinct types of measurement.
If you are using a 120V power supply, a 600 watt floodlight will draw 5 amps of current (600 watts รท 120 volts = 5 amps). Remember to always check the specific electrical requirements of your floodlight to ensure the correct amperage.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
Zero. Watts is the product of Amps x Volts. As you can see an amperage value is needed. Voltage = Watts/Amps. Volts = 200/? 20 volts
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
To find the amperage, use the formula: Amps = Watts / Volts. In this case, 600 Watts / 115 Volts = approximately 5.22 Amps. So, the microwave oven requires approximately 5.22 Amps of current.
Volts don't make power. Watts do. Watts = (volts) x (amps) 1 horsepower = 746 watts
watts = volts x amps, example-2 watts=2 volts x 1 amp, example- 2 watts=120 volts x .60 amp.