The cost of dirt per cubic foot can vary depending on factors such as quality, location, and quantity purchased. On average, you can expect to pay anywhere from $10 to $50 per cubic foot of dirt. It is best to check with local suppliers for specific pricing in your area.
Dirt has varying densities, but on average, 18 tons of dirt would fill about 12 cubic yards.
The cost of river rock can vary depending on location, quality, and supplier. You would need to check with a local supplier for the current price of river rock per cubic yard to calculate the cost for 0.71 cubic yards.
The volume of the hole can be calculated by multiplying its length, width, and depth: 3 ft (depth) x 2 ft (width) x 10 ft (length) = 60 cubic feet. Therefore, 60 cubic feet of dirt can be removed from the hole.
Theoretically, none. The amount of dirt excavated to create such a hole would be 1 cubic metre. However, excavated dirt (depending on the nature of the dirt) can increase in mass by up to a third the original size. That is why when you dig a big hole then fill it in (getting all the dirt back) the hole is raised on top not flat.
The cost of dirt per cubic foot can vary depending on factors such as quality, location, and quantity purchased. On average, you can expect to pay anywhere from $10 to $50 per cubic foot of dirt. It is best to check with local suppliers for specific pricing in your area.
1,728 cubic inches of it
300 cubic feet of dirt
AnswerNothing.... (no dirt in a hole)Answer1800 lbsSize of hole = 3 x 3 x 2 = 18 cubic feet, x 100 lbs per cubic foot = 1800 lbsAnswerIf there is dirt in the hole, it would remove the hole, so there is no real answer to this. You could ask "If dirt is 100 lbs per cubic foot, what is the weight of 18 cubic feet?", to which the answer is 18*100=1800 lbs... Have fun!
A ton of dirt is typically about 1 cubic yard in volume, which is equivalent to 27 cubic feet. This can vary depending on the density and moisture content of the dirt.
30 cubic feet of dirt have been removed,and no dirt remains in the hole.
The answer will depend on the depth to which the dirt is spread.
If the hole is a square then there is 36 cubic feet of dirt in the hole.
There's no dirt in a hole.
8ft*6ft*10in 96in*72in*10in 960sqin*72in 69120 cubic inches of dirt or 5760 cubic feet of dirt.
There would be no dirt in a hole, but the hole would fit 30 cubic feet.
A million cubic meters.