0
What else can I help you with?
How much dirt would be in a hole 6 ft deep and 6 ft wide that had been dug with a squared edge shovel?
32 cubic feet
How much dirt would it take to fill a hole 4ft deep by 5 ft wide?
The answer will depend on how long the hole is. The hole has 3 dimensions that determine its volume. You have provided measurements of only two dimensions.
How much water does a hole that is 3 ft x 3 ft x 2 ft hold?
18ft3
How much yard will still be available after installing a round swimming pool 12 feet in diameter in the middle of a yard that measures 40 ft. by 20 ft?
Total area of yard = 40 ft * 20 ft = 800 sq ft. Area of pool = pi*r2 = pi*6*6 = 113.1 sq ft. Area left = 686.9 sq ft.
How much dirt. 2.12 acres. Need to dig 1 feet of clay and replace with stone?
An acre is 43650 sq ft. In 2.12 acres, there are 92347.2 sq ft. If you need to dig out 1 foot over the entire property, you will be removing 92347.2 cubic feet of dirt. Divide by 27 (cubic feet in a cubic yard) to convert the volume to 3420.3 cubic yards. If an average commercial dump truck holds 10 to 14 cubic feet of dirt, that translates to anywhere from 244 to 342 truckloads of dirt to haul away.
How much dirt is in a hole 3 ft x 6 ft x 6 ft?
No. There is no dirt in a hole of any dimensions. It's a hole. D'oh....
How much dirt is in a hole 3 ft by 3 ft by 3 ft?
None! It's A freakin' hole!
How much dirt is in a hole 2ft by 3ft by 6 ft?
If the hole is a square then there is 36 cubic feet of dirt in the hole.
How much dirt can be taken from a hole measuring 3 ft deep 2 ft wide and 10 ft long?
None. Since it is a hole, there is no dirt in it. A hole, by definition, must be empty.
How much dirt is there in a hole that is three feet wide nfour feet long and two feet deep?
There is no dirt in a hole, as a hole is an empty space where dirt has been removed.
How much dirt in a rectangular hole 4 ft wide by 6 ft long by 12ft deep?
There is NO dirt, it is a hole! If you want to fill it with dirt, that is 4x6x12=288 cubic feet, weighing about 28,800 pounds
How much dirt can be taken from a hole measuring 3 ft long by 2 ft wide by 6 ft deep?
36 cubic feet of dirt.
How much dirt to fill a hole 6 inches deep 18 feet wide?
There is no dirt in the hole, otherwise it would not be a hole! If you want to know how much dirt is required to fill the hole, or, equally, how much dirt has been removed to make the hole, that is the volume of the hole itself, then: The volume of the hole is length x width x height. The height is in inches, so must be converted to feet first: 12 in = 1 ft ⇒ 1.5 in = 1.5 ÷ 12 ft The volume of the hole is then: 19 ft x 6 ft x 1.5 ÷ 12 ft = 14.25 cu ft
How much dirt is in a hole if the hole is 10 ft in width 5 ft long and 20 ft deep?
Theoretically, none. The amount of dirt excavated to create such a hole would be 1 cubic metre. However, excavated dirt (depending on the nature of the dirt) can increase in mass by up to a third the original size. That is why when you dig a big hole then fill it in (getting all the dirt back) the hole is raised on top not flat.
How much dirt is in a hole that is 5 ft in width 4 ft deep and 50 ft long?
None! Very funny!
How much dirt does it take to fill a hole that's 2ftx3ftx4ft?
To find out how much dirt it takes to fill a hole measuring 2 feet by 3 feet by 4 feet, you calculate the volume of the hole. The volume is found by multiplying the dimensions: 2 ft × 3 ft × 4 ft = 24 cubic feet. Therefore, it takes 24 cubic feet of dirt to fill the hole.
How much dirt in a hole two feet by three feet by four feet?
There is no dirt in a hole because a hole is defined by the absence of material, in this case dirt. If you were to fill the hole with dirt, it would require 24 cubic feet of dirt to completely fill it.
