A room 3 feet 7 inches by 6 feet has an area of about two (1.99741536) square meters.
Wiki User
∙ 9y agoWiki User
∙ 9y agoA room measuring 3.6 x 3.5 meters is 135.6 square feet.
Wiki User
∙ 6y ago1 ft = 0.3048 m (exactly)
→ 10 ft × 3 ft = (10 × 0.3048) m × (3 × 0.3048) m = 2.7870912 sq m ≈ 2.787 sq m
Wiki User
∙ 6y ago10ft x 3ft = 30 square feet, converts to 2.79 square metres (to 2 significant figures).
The room is approximately 6.04 square meters.
Wiki User
∙ 9y agoThe answer is 42 m2.
Since 1 yard is equal to 3 feet, we can convert the square footage to square yards by dividing by 9 (since 3ft x 3ft = 1yd x 1yd). Therefore, 20 square feet is equivalent to 2.22 square yards.
To convert meters to feet, multiply the number of meters by 3.281. Then, to convert feet to inches, multiply the number of feet by 12. This will give you the equivalent measurement in feet and inches.
3ft. in 1 yard.12in. in 1 foot.12 times 3 equals 36 inches.
A 30 square foot room could be many dimensions... 6ft by 5ft, 10ft by 3ft, or the more common size of 6" x 60ft. The length (measured in feet) x the width (measured in feet) = the square feet. By this theory, the room could be a mile long, but it would only be 1/16 of an inch wide.
200yards x 3ft/1yd x 1meter/3.28ft = 182.93 meters
About 0.84 square meters (0.83612736 square meters)
3ft by 4ft
4.18 square meters.
1000 millimetres or 3ft 3.37 inches
1.219 x 0.9144 = 1.11 square meters
1 acre = 4,046.9 square meters
576 square inches or 4 square feet
One cubic yard equals 27 cubic feet (3ft X 3ft X 3ft). So if you were able to slice that "cube" into 6 inch sections, you would have 6 slabs at 6in X 3ft X 3ft. Placed side to side 18ft x 3ft x 6in. For a total of 54 square feet at six inches deep.
Your question is phrased wrong. You can't convert sq inches into yards. Yards implies a straight line and sq inches implies area. But you can do square yards into square inches. A square yard is 3ft by 3ft or 9 square feet. Each square foot is 12 inches by 12 inches or 144 square inches. 9 X 144 = 1296. So, 1 sq yd equals 1,296 sq in. Did that help?
The answer will depend on how thick you want the coverage to be. If you want: 1. Two Inches = 18 square yards 2. Three Inches = 12 Square yards 3. Four Inches = 9 square yards See the pattern here? If the dirt was a Cube of 3ft x 3ft x 3ft, then you divide 36" by the thickness of coverage in inches. The answer is the number of Square Yards of coverage.
10' x 12' = 120ft² 1yd² = 3ft x 3ft = 9ft² 120ft² / 9 ft² = 13.33yd²
Depends on if your talking about a 'square yard' or a 'cubic yard'. A 'square yard' has 9 square feet (3ft x 3ft). A 'cubic yard' has 27 square feet (3ft x 3ft x 3ft)