0
platinum resistance thermometer
Wiki User
∙ 9y ago
A thermocouple or a pyrometer is commonly used to measure temperatures above 1250 degrees Celsius. These devices are designed to withstand high temperatures and provide accurate temperature readings in such extreme conditions. It is important to select the appropriate type of thermometer that can handle the desired temperature range for accurate results.
Add your answer:
Earn +20 pts
Could the above thermometer be used to record the temperature of boiling water?
No, the above thermometer cannot be used to record the temperature of boiling water. Most household thermometers have a limited temperature range that does not typically extend to the boiling point of water, which is 100 degrees Celsius (212 degrees Fahrenheit). To measure the temperature of boiling water, a thermometer with a higher temperature range is required.
If you started with water -10 degrees celsius describe what a thermometer would show if you heat it until it is over 110 degrees celsius?
The thermometer would show a gradual increase in temperature from -10 degrees Celsius as the water is heated. Once it reaches 0 degrees Celsius, the temperature will plateau until all the ice melts. Then, the thermometer will continue to rise above 0 degrees Celsius until it reaches over 110 degrees Celsius as the water boils.
What would you use to measure the elevation above sea level on air temperature and air pressure?
elevation above sea level . . . barometer or GPS air temperature . . . thermometer air pressure . . . barometer
When thermometer is laid ouside the sun does it measure suns temperature or air temperature?
If a thermometer is laid out in direct sunlight, it will not measure the temperature of the air surrounding it. It will measure the temperature of the heat directly reaching it.
What is temperature in the metric unit?
Temperature is measured in the metric unit of degrees Celsius (°C).
Could the above thermometer be used to record the temperature of boiling water?
No, the above thermometer cannot be used to record the temperature of boiling water. Most household thermometers have a limited temperature range that does not typically extend to the boiling point of water, which is 100 degrees Celsius (212 degrees Fahrenheit). To measure the temperature of boiling water, a thermometer with a higher temperature range is required.
How much temperature has to raise to get a reading?
Temperature readings are typically measured on a scale, such as Celsius or Fahrenheit. To get a higher reading on a thermometer, the temperature must increase on that scale. For example, if you have a thermometer in Celsius and the current reading is 20°C, the temperature would need to increase to above 20°C to see a higher reading.
Why is a medical thermometer 35 to 42 Celsius?
A medical thermometer only has a range of 35 to 42 celsius, as that is the only realistic temperature range that the human body will be in between. This is because, if anyone is below 35 celsius, or above 42 celsius, then they will be dead, or close to dying, and you don't need a thermometer to recognize either of these symptoms.
If you started with water -10 degrees celsius describe what a thermometer would show if you heat it until it is over 110 degrees celsius?
The thermometer would show a gradual increase in temperature from -10 degrees Celsius as the water is heated. Once it reaches 0 degrees Celsius, the temperature will plateau until all the ice melts. Then, the thermometer will continue to rise above 0 degrees Celsius until it reaches over 110 degrees Celsius as the water boils.
Why does the clinical thermometer has a short temperature range from 35 degree Celsius to 42 degree Celsius?
Because4 at below 35o Celsius you are dead and at above 42o Celsius you are also dead!! Somewhat kidding, but these temperature extremes are rarely seen in humans anyway, so why have a wider scale.
Is 30 degrees Fahrenheit below zero?
The number 30 is above zero. Is this a trick question ? At the same temperature, a Celsius thermometer will read -1.
What is the use of Celsius in thermometer?
Celsius is a temperature scale used in thermometers to measure temperature. It is widely adopted as an international standard for measuring temperature and is based on the freezing and boiling points of water, with 0 degrees Celsius being the freezing point and 100 degrees Celsius being the boiling point at standard atmospheric pressure.
What is the name of thermometer to measure high temperature?
A pyrometer is a type of thermometer used to measure high temperatures, typically above 500°C. It works by detecting the intensity of electromagnetic radiation emitted by the object being measured, providing a non-contact method for temperature measurement.
What would you use to measure the elevation above sea level on air temperature and air pressure?
elevation above sea level . . . barometer or GPS air temperature . . . thermometer air pressure . . . barometer
How is the variable measured in air temperature?
Air temperature is typically measured using a thermometer placed in the air, often at a specific height above the ground to ensure consistency. The temperature reading is usually captured in degrees Celsius or Fahrenheit.
How high does a thermometer go?
107 degrees Fahrenheit, because once a human reaches that temperature they're basically cooked from the inside. It's kinda like a hard-boiled egg.
What would happen if you placed the thermometer bulb above the junction of the condenser and the distilling column?
Placing the thermometer bulb above the junction of the condenser and the distilling column would measure the temperature of the vapors leaving the column. This temperature reading can help monitor the progress of distillation and identify when different components are being distilled.
