Wiki User
∙ 14y agoThere are hundreds of "normal" gases. Hydrogen is one of them. Are you talking about stove gas ? Car "gas" which isn't even a gas ? You really need to be more specific. Less pedestrian wouldn't hurt either.
Wiki User
∙ 14y agoThe weight ratio of hydrogen gas to normal gas in air is approximately 1:14. This means that for every 1 part of hydrogen gas, there are about 14 parts of other gases like nitrogen and oxygen. This ratio remains fairly consistent regardless of the volume of the gas mixture being measured.
1 liter of hydrogen gas is equal to 0.001 cubic meters.
To convert cubic meters to weight, you need to know the density of the substance you are measuring. Multiply the volume in cubic meters by the density in kilograms per cubic meter to get the weight in kilograms. Alternatively, you can use specific gravity if the substance is a liquid.
1000 cubic meters of air is equivalent to 1000 normal cubic meters of air. The term "normal cubic meters" (Nm^3) is typically used to represent gas volumes adjusted to standard conditions of temperature and pressure (usually 0 degrees Celsius and 1 atmosphere pressure). In this case, since both the given volume and the normal volume are in the same units (cubic meters), they are equal.
The weight of a cubic meter of lentils can vary depending on factors such as size, moisture content, and variety. On average, a cubic meter of lentils can weigh between 700 to 800 kilograms.
To convert 1 cubic meter to 1 ton, you need to know the density of the material. The density of the material will determine the mass (weight) of the 1 cubic meter. Once you have the density, you can use the formula: mass (in tons) = volume (in cubic meters) x density (in tons per cubic meter) to get the conversion.
The weight of standard air is 1.2256 Kg/ Cubic Meter The weight of hydrogen is 0.0857 Kg/ Cubic Meter The weight of helium is 0.1691 Kg/ Cubic Meter Subtracting the weight of hydrogen from air gives you the gross buoyant lift of hydrogen as 1.1399 Kg/Cubic Meter Subtracting the weight of helium from air gives you the gross buoyant lift of helium as 1.0565 Kg/Cubic Meter These values are variable under altitude, pressure, temperature, humidity and purity of gas. Hope this helps you.
Depends on the pressure. Assuming standard pressure, hydrogen's density (as a gas) is 0.0899 kg/m^3. If you have one cubic meter of hydrogen, it will weigh .0899 kg.
A cubic metre of gas at normal temperature and pressure has a mass of 44.643 times the molecular weight of the gas in grams. So a cubic metre of hydrogen is 89.3 grams while a cubic metre of CO2 is 1964 grams. If the volume is 22.4 litres, the mass in grams equals the molecular weight.
what is the weight of salt water of one cubic meter
no
A cubic meter of pure water has weight of 1000kg
You will need to know the weight of the plastering. If you identify a weight per cubic meter, multiply it by the number of cubic meters that you have.
Depends. A cubic meter of WHAT? If it's a cubic meter of lead, it would weigh quite a bit. A cubic meter of air, not so much. The standard substance that is used to relate metric measurements to each other is water. The "gram" was defined as the mass (not weight, but similar) of one cubic centimeter of water at normal temperature. There are 1 million cubic centimeters in a cubic meter, so a cubic meter of water would have a mass of 1 million grams, or 1,000 kilograms, or 1 metric ton. To obtain the mass of 1 cubic meter of some other substances, simply multiply the specific gravity of the substance by the mass of a cubic meter of water.
33 Ton, On average granits weighs 2.75 Ton per cubic meter
The weight varies; but if it's dry sand, the cubic meter will weigh around 1500 kilos.
100
2000 to 2500 Kg/cubic meter depending upon the grade of concrete