The diameter of an insulated 750 MCM copper wire is 1.25 inches. The insulated 750 MCM copper wiring has 61 strands and has a weight of 2.7 pounds per foot.
A 750 MCM wire has a cross-sectional area of approximately 500,000 circular mils.
A 1600 amp service typically requires 500 kcmil copper wire or 750 kcmil aluminum wire. It's important to consult with a qualified electrician to determine the exact size and type of wire needed for your specific installation to ensure safety and compliance with local electrical codes.
The weight of 3/0 copper wire is approximately 559.5 pounds per 1000 feet. So, the weight of 3/0 copper wire per foot would be approximately 0.5595 pounds.
For a 400 amp service, you would typically use 500 kcmil copper wire or 600 kcmil aluminum wire for the main service conductors. It's important to consult with a licensed electrician and check local electrical codes to ensure the correct wire size is used for your specific installation.
The diameter of an insulated 750 MCM copper wire is 1.25 inches. The insulated 750 MCM copper wiring has 61 strands and has a weight of 2.7 pounds per foot.
A 750 MCM wire has a cross-sectional area of approximately 500,000 circular mils.
500mcm 37 strand copper wire = 1.544lbs/ft.
2.2 lbs per ft
A 1600 amp service typically requires 500 kcmil copper wire or 750 kcmil aluminum wire. It's important to consult with a qualified electrician to determine the exact size and type of wire needed for your specific installation to ensure safety and compliance with local electrical codes.
The weight of 350 MCM (thousand circular mils) per foot depends on the material it is made of. For example, copper 350 MCM wire weighs approximately 2.6 pounds per foot, while aluminum 350 MCM wire weighs around 1.6 pounds per foot.
Using the AWG for wire sizes only goes up to 4/0. After that the increases use MCM to size the wire. So your 262 MCM wire size will be same in AWG. There is no 262 MCM in the North American market place. It goes in 50 MCM increments starting at 250 MCM , 300 MCM, 350 MCM, 400 MCM right up to 2000 MCM cable.
750,000 circular mils. A wire that is 1 mil (.001 inches) in diamter is defined to have an area of 1 circular mil. The area in circular mils = (diameter in mils) ^ 2. To convert this to area in square inches, multiply 750,000 * pi / 4,000,000 = 0.589 sq in.
The weight of 3/0 copper wire is approximately 559.5 pounds per 1000 feet. So, the weight of 3/0 copper wire per foot would be approximately 0.5595 pounds.
It depends on a lot of factors. Generally speaking, if the insulation is THHN then the rating is 350 amps. If the insulation is THWN then the rating is 310 amps. The ampere rating for wire depends on the temperature of the environment it will be used in, the insulation rating and the number of circuits installed in a conduit. There are also other factors to consider... like voltage drop in long runs.
The bare conductor is about 1.05 lb per foot. Insulated wire weight varies by type of insulation.
250 MCM copper wire weighs approximately 0.311 pounds per foot.