0
What else can I help you with?
Can you use 10 gauge wire to connect a 2 15 amp outlets to a 30 amp breaker?
No, it is not safe to use 10 gauge wire with a 30 amp breaker as the wire is not rated for that high of a current. It is important to use the correct wire gauge that matches the breaker amperage to prevent overheating and potential fire hazards. For a 30 amp breaker, you should use at least 10 gauge wire.
Could you use a 12gauge wire for a 25 amp breaker single pole?
No, a 12-gauge wire is typically rated for a 20 amp circuit. To safely handle a 25 amp breaker, you would need to use a 10-gauge wire. It's important to match the wire gauge to the amperage rating of the breaker to prevent overheating and potential fire hazards.
Can 13 gauge wire be connected to a 20 amp breaker?
No, because NEC says that 12 AWG wire is the smallest wire that can safely handle 20 A. If you installed a smaller wire on a 20 A breaker you could possibly overheat the wire and cause it to fail, which can start a fire. It would not be to code. And the National Electrical code does not list a 13 gauge wire.
Can you connect 14 gauge wire to 12 gauge wire on a 20 amp breaker if the 14 gauge is the end of the run and dedicated to lights?
yesAnother (corrected) answer.NO! The circuit breaker is there to protect the wiring from overheating. It wouldn't matter where on the circuit you decided to put the 14 gauge wire, you would need to change the breaker to 15 Amp if you did that. Using 14 gauge wire on a 20 amp circuit is a fire hazard and contrary to UBC. Contact your local building and zoning department to verify.
What Size breaker for 6 gauge wire?
For 6 gauge wire, typically you would use a 60 amp breaker for larger appliances like a dryer or cooktop. However, always consult with a licensed electrician to ensure the proper breaker size for your specific application and local electrical code requirements.
What size wire do I need for a 30 amp breaker?
For a 30 amp breaker, you will need a wire that is at least 10 gauge in size.
What size wire do you need for a 50 amp breaker?
For a 50 amp breaker, you would typically need a 6-gauge wire.
What size wire do I need for a 50 amp breaker?
For a 50 amp breaker, you will need a wire that is at least 6 gauge in size to safely handle the electrical load.
What gauge wire should be used for a 30 amp breaker?
For a 30 amp breaker, a 10-gauge wire should be used.
What gauge wire should be used for a 60 amp breaker?
For a 60 amp breaker, a 6-gauge wire should be used.
What is the recommended wire size for a 100 amp breaker?
The recommended wire size for a 100 amp breaker is typically 2-gauge copper wire or 1/0-gauge aluminum wire.
What is the recommended wire size for a 20 amp breaker?
The recommended wire size for a 20 amp breaker is typically 12-gauge wire.
What is the appropriate wire size for a 25 amp breaker?
The appropriate wire size for a 25 amp breaker is typically 10 gauge wire.
What is the appropriate wire size for a 30 amp breaker?
The appropriate wire size for a 30 amp breaker is typically 10 gauge wire.
What is the recommended wire size for a 25 amp breaker?
The recommended wire size for a 25 amp breaker is typically 10 gauge wire.
What is the recommended wire size for a 30 amp breaker?
The recommended wire size for a 30 amp breaker is typically 10 gauge wire.
What is the recommended wire size for a 50 amp breaker?
The recommended wire size for a 50 amp breaker is typically 6-gauge wire.
