0
What else can I help you with?
What gauge wire you would use to wire a 5kw heater hvac?
For a 5kW heater HVAC system, you would typically need to use 10-gauge wire to handle the current load safely. It's important to always consult the manufacturer's specifications or a licensed electrician to ensure you are using the correct wire gauge for your specific setup.
What amps is for 16 gauge wire?
10
What gauge of wire is needed for a baseboard heater 1000 watt 240 Volt 4.2 Amp?
I would use #12. THHN #12 is rated for 30 amps. <<>> The minimum size wire that you can use, to save overhead costs, is #14 wire which is rated at 15 amps. Home wiring cable has a rating of 300 volts. Also the above answer is wrong, #12 is only rated at 20 amps. If you have doubts about an answer check out the answerer's bio by clicking on their name.
What gauge of wire to connect electric dryer?
You need a 3 conductor #10 cable. A #10 wire is rated at 30 amps.
What is ampere rating of 16 gauge wire at 120 volts?
For a 16-gauge wire at 120 volts, the ampere rating would typically be around 10-12 amps. However, it's important to consult the specific standards and guidelines provided by regulatory bodies like the National Electrical Code (NEC) to ensure safe and appropriate usage of the wire.
What is ampere rating of 10 gauge wire at 120 volts and at 240 volts?
30 amps.
What size copper wire do you need for 240 volts 16 amps at 150ft?
10 gauge
What gauge wire would you need 5600 watts 240 volts 23.3 amps?
AWG # 10.
What gauge wire is required for 25 amps over 100 ft at 240 volts?
10 AWG copper.
What gauge wire you would use to wire a 5kw heater hvac?
For a 5kW heater HVAC system, you would typically need to use 10-gauge wire to handle the current load safely. It's important to always consult the manufacturer's specifications or a licensed electrician to ensure you are using the correct wire gauge for your specific setup.
What gauge wire can handle 28 amps?
10 guage
What size wire for 10kw 240 volt?
10 mm2 cross section should be sufficient (#6 wire?)
If I have 150ft of 10 gauge wire with 60 amp service how many amps and watts do I have available at the end of the line?
10 gauge wire will only run up to 30 amps
What is the amperage limit of 10 gauge solid wire?
Typically 30 amps.
What amps is for 16 gauge wire?
10
How many amps is a 16 gauge wire 12 volts rated for?
12 ga, 20 amp. 14 ga, 15 amp. 16 ga, 10 amp.
Wire size for 500 feet distance 120 volt 20 amps?
The American Wire Gauge code table shows 8 gauge safe for 24 Amps, 10 Gauge for 15 Amps. If the circuit is going to be used at capacity (2400 Watts in this case), 8 or 10 gauge is the minimum, if load is constant, use 8 gauge. Voltage ability of the wire is dependent on the insulation thickness and material. So 20 amps at 120 Volts is 2400 watts of power, and 20 amps at 12 volts is 48 watts of power. Both would require the same gauge of wire, but the higher voltage would need better insulation. <<>> This is a voltage drop question. A #1 copper conductor will limit the voltage drop to 3% or less when supplying 20 amps for 500 feet on a 120 volt system.
