0
What else can I help you with?
What is the ampere rating of a 8 gauge wire at 240 volts?
The ampacity of an 8 gauge wire at 240 volts would depend on the specific type of wire and the installation conditions. Generally, an 8 gauge wire can safely carry around 40-50 amps of current. It is important to consult the National Electrical Code (NEC) and local regulations for precise guidance.
What gauge wire you would use to wire a 5kw heater hvac?
For a 5kW heater HVAC system, you would typically need to use 10-gauge wire to handle the current load safely. It's important to always consult the manufacturer's specifications or a licensed electrician to ensure you are using the correct wire gauge for your specific setup.
What does 1500 watts equal in amps at 120 volts?
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.
How many amps with 70 watts 13.8 Volts dc?
To calculate the amperage, we can use the formula: Amps = Watts / Volts. In this case, it would be 70 watts / 13.8 volts ≈ 5.07 amps. So, with 70 watts and a voltage of 13.8 volts DC, the amperage would be approximately 5.07 amps.
How many volts is 2 gauge 200 amp 3 ohms?
Ohm's Law states Volts = Amps x Resistance. You would need to apply 600 volts across 3 ohm load to have 200 Amps flow in circuit. Not sure what you are really asking and why you mentioned 2 gauge.
What wire gauge is needed to carry 150 amps at 240 volts?
At the service entrance you will need AWG 1/0 gauge.
What gauge wire would you need to carry 40 amps at 12 volts dc?
A #8 wire with an insulation rating of 75 or 90 degrees C is rated at 45 amps.
What gauge wire would you need to handle 14 amps at 120 volts?
You would need to use a #12 copper conductor to continuously draw 14 amps at 120 volts.
What is the max amps for 14 gauge wire at 12 volts?
15 amps
What is the ampere rating of a 8 gauge wire at 240 volts?
The ampacity of an 8 gauge wire at 240 volts would depend on the specific type of wire and the installation conditions. Generally, an 8 gauge wire can safely carry around 40-50 amps of current. It is important to consult the National Electrical Code (NEC) and local regulations for precise guidance.
What size wire to carry 8 amps at 120 volts?
A # 14 copper conductor will be fine to carry 8 amps at 120 volts. This size conductor is rated at 15 amps.
What gauge wire would you need 5600 watts 240 volts 23.3 amps?
AWG # 10.
What is ampere rating of 10 gauge wire at 120 volts and at 240 volts?
30 amps.
14 wire for 2.4kw?
14 gauge wire is for 15 amp circuits. At 220 volts that would be enough for 2.4 kw.At 120 volts it would need 12 gauge wire which is rated for 20 amps.
What gauge wire would I need for 2500 feet for 240 volts and 0.4 amps?
A #14 wire will do the job.
How many amps will 4.0 gauge wire carry?
140 AMPS
What is the cable size for 90 kw motor?
Depends upon the voltage. The formula for amperage or (wire size) is Watts / Voltage. If the voltage is 220 volts, then the amperage would be over 400 amps. This would require a large wire size to run it. If it were 440 volts, the amperage would be 1/2 or 200 amps. That would require a smaller wire size. As the voltage goes up, the amperage goes down. At a thousand volts, the amperage would only be 90 amps. A wire gauge or size of a #2 would carry 90 amps for small distances.
