Wiki User
β 11y agoThe LSM-500S Mechanical Engineers measure parts of machinery to an accuracy of
0.025mm or 0.001inch for most of the parts they manufacture and sometimes more accurate than that. The instrument that is used most commonly is called a Micrometer
(not to be confused with the 'unit' called a micro-meter. ) They also use an instrument called a Vernier Gauge. Since about 1975 instrument makers have been making what are called "Dial Vernier Gauges" which are easier to use and red, than traditional Vernier Gauges. A Micrometer is more accurate, and good quality Micrometers measure to an accuracy of , 1 ten thousandth of an inch (0.0001 inch) or 1 hundredth of a millimetre.(0.01mm)
The diameter of rotating parts in machinery are usually made to an accuracy of 1hundredth of a millimetre.
Wiki User
β 11y agoA micrometer is a precision measuring instrument that can be used to measure very small lengths or distances with high accuracy. It typically has a resolution of 0.01mm allowing for measurements in the range of 0.005 to 2mm.
A ruler or tape measure can be used to measure length, width, and height of objects accurately. These tools are commonly found in households and offices for various measuring tasks.
a bathroom scale
The instrument used to measure elevation is called an altimeter. It works by measuring air pressure changes as altitude changes, providing a rough estimate of elevation above sea level.
It turns out that decimeters are seldom used in practice. Instead, millimeters, centimeters and meters are normally used. Of course, in theory you could measure any length in decimeters - and especially lengths which are in an appropriate range, somewhere between about 1-100 decimeters.
An odometer measures the distance traveled in a car by tracking the number of rotations of the vehicle's wheels. The odometer is typically displayed on the dashboard and provides the driver with information on the total distance the car has traveled.
You could measure distances between cities.
A ruler or tape measure can be used to measure length, width, and height of objects accurately. These tools are commonly found in households and offices for various measuring tasks.
Such an instrument could be called the Laser Scan Micrometer.
You could measure lengths of small objects like a pen or bookshelf in decimeters. Decimeters are one-tenth of a meter, so they are useful for measuring lengths that are between centimeters and meters.
Depends on what you are measuring. Short distances could use a meter stick or the flip-side of a tape measure. For longer distances you could use a laser set to metric or hop in a car measure the distance in miles and then convert it.
One could use a ruler.
1/10 1/5
The instrument you would use could be a beaker or a graduated cylinder.
Your teacher wants you to use your imagination and think of other things you could compare your dog to instead of a ruler or yardstick. What about measuring your dog in cat-lengths or pencil-lengths? You can think of lots of ways to measure a dog if you just use your brain!
Light year is used to measure the stellar distances whereas miles and km is used to measure distance on Earth.
Measure each side and add them up to get the sum of the side-lengths = perimeter.
a bathroom scale